Na'urar Siyar da DIP ta atomatik TY-4530DPF

Hanyar siyarwa:

Matukar an sanya abin da ke da ruwa mai kyau a kan mariƙin allura, sannan kuma ya taka ƙafar ƙafa, za a iya siyar da ɓangarorin maɓalli daban-daban a lokaci ɗaya.Kusurwoyin duk ana sarrafa su ta hanyar microcomputer, gaba ɗaya suna yin simulating ka'idodin dip soldering na hannu, ba a buƙatar horar da ma'aikata, kowa na iya tsoma aikin siyarwa, ba a buƙatar ƙwararrun hannaye, ingancin walda yana da ƙarfi, kuma ana iya haɓaka haɓakar samarwa.

Aiki:

1. Dace da kewaye allon da general soldering kayayyakin

2. Inganta ingancin walda da yin koyi da walƙiya na hannu

3. Inganta ingantaccen samarwa, samfuran batch za a iya welded a lokaci guda, wanda kusan sau 4 ya fi girma

Siffar:

1. Ana amfani da motar motsa jiki don motsa ƙwallon ƙwallon don motsi sama da ƙasa.Daidaiton motar shine 0.1mm, kuma zurfin siyarwar daidai ne.

2. Jirgin kewayawa yana yawo a saman tin don tin na nutsewa, wanda zurfin solder bai shafe shi ba.

3. Saurin ɗagawa na samfurin da za a tsoma shi ne daidaitacce, kuma kusurwar dipping na allon kewayawa yana daidaitawa don rage tashin hankali da kuma saduwa da bukatun tsari.

4. Yana iya ta atomatik scrape kashe surface oxide zuwa tin slag tank a kowane aiki sake zagayowar don inganta waldi quality.

5. Yana iya preheat saman da kewaye hukumar da juyi don inganta aiki da waldi quality.

6. The soldering lokaci za a iya daidaita sabani daga 1 seconds zuwa 10 seconds

7. Ana amfani da bututun dumama da aka shigo da su, waɗanda aka keɓe kuma suna da tsawon rayuwar sabis.Ikon zafin jiki yana ɗaukar ikon PID tare da daidaito na ± 2°.Tanderun tin an yi shi da titanium mai tsabta ta masana'antu, kuma gano zafin jiki yana amfani da nau'in thermocouples na K.

Fasalolin tsarin tanderun fesa:

Ana shigo da bututun daga Taiwan.Ciki na bututun ƙarfe an yi shi da tagulla, kuma bangon ciki an yi shi da wani tsari na goge hannu na musamman, wanda ba za a lalata ta hanyar juzu'i ba.Tasirin atomization yana da kyau, ƙwanƙarar fesa ita ce uniform kuma juzu'in yana da kyau wettability, wanda zai iya cire oxides gaba ɗaya a saman allon kewayawa da kowane toshewa, kuma a lokaci guda ƙirƙirar fim ɗin anti-oxidation uniform akan. da kewaye hukumar da low surface tashin hankali.Don cimma mafi kyawun sakamako na immersion tin soldering.

Ka'idar tanderun feshin ita ce famfo na lantarki yana sarrafa ruwan ruwa zuwa ƙananan ɓangarorin ta cikin bututun ƙarfe, kuma ya lulluɓe shi a saman allon da'irar don haɓaka ingancin walda da adana fiye da rabin abin amfani.

Gabatarwa don fesa:

1,Ƙayyadaddun tanki na ciki:300*300*140mm

2,Nozzle model: Danfoss

3,Form ɗin tuƙi: lantarki

Spma'aunin fasaha na wutar lantarki:

1. Bututun ƙarfe diamita: 1.3mm

2. Girman fitar da ruwa: 0-360ml / min

3. Amfanin iska (ci gaba da busawa): 100l / min

4. Flat busa nisa: 200mm tsawo 200mm;300mm tsawo 320mm

5. Nisa na madauwari mai nisa: 70mm a diamita a tsayin 200mm;80mm a diamita a 300mm tsawo

6. Atomized matsakaicin girman barbashi: 100um

7. Kwamfutar iska: 0.75-1.5KW

8. Matsakaicin karfin iska: 5kg/cm²

9. Nisa tsakanin bututun ƙarfe da samfurin: 20-30cm

Fa'idodi idan aka kwatanta da tsoma hannu da kumfa:

1. Ajiye juye-juye, guje wa rashin ƙarfi, da rage farashi

2. Ƙara yawan aiki da kuma inganta ingancin walda

3. Sauƙaƙan aiki, ana iya sarrafa shi ta hanyar taka ƙafar ƙafa

4. Aiwatar da juzu'i fiye da daidai