GKG Cikakken Solder Manna Printer H1500
| Ayyukan Inji | |
| Maimaita daidaiton matsayi | ± 0.015mm |
| Buga daidaito | ± 0.03mm |
| NCP-CT (Ba ya haɗa da tsaftacewa da bugu) | <12 dakika |
| Tsari CT | 6 min |
| Canza layin CT | 4 min |
| Sigar sarrafa Substrate | |
| Max.girman allo | 1500*350mm |
| Min.girman allo | 80*50mm |
| Kaurin allo | 0.8 ~ 6 mm |
| Kewayon inji kamara | 1500*350mm |
| Matsakaicin nauyin allo | 10kg |
| allon baki yarda | 3.5mm |
| Tsawon allo | 15mm pin |
| Gudun sufuri | 900± 40mm |
| (Max) saurin sufuri | 1500mm/s (Max) |
| Hanyar watsawa | Hagu zuwa dama |
| dama zuwa hagu | |
| a ciki da waje guda | |
| Tsarin tallafi | Magnetic fil |
| Taimako toshe | |
| Teburin sama na hannu | |
| Jirgin damp | Manual da saman damping |
| Matse gefe | |
| Siffofin bugawa | |
| Saurin bugawa | 10 ~ 200mm |
| Buga matsa lamba | 0.5-15 kg |
| Yanayin bugawa | Daya/biyu |
| Gueegee irin | Ruwan roba/Sauke (kwanaki 45/55/60) |
| Snap-off | 0 ~ 20mm |
| Saurin karyewa | 0 ~ 20mm/sec |
| Girman firam ɗin samfuri | 720*300mm ~ 1800*750mm |
| Yanayin matsayi na ragar karfe | Manual |
| Tsaftacewa sigogi | |
| Hanyar tsaftacewa | Dry, Rigar injin |
| Tsabtace saurin gudu | Saƙa tsaftacewa |
| Tsarin tsaftacewa | Babban digo |
| Tsaftacewa bugun jini | Ƙirƙirar atomatik |
| Matsayin tsaftacewa | Tsabtace gefen dama |
| Gudun tsaftacewa | 10-200/sec |
| Yin amfani da ruwa mai tsaftacewa | Daidaitacce ta atomatik/da hannu |
| Tsaftace amfani da takarda | Daidaitacce ta atomatik/da hannu |
| Ma'aunin hangen nesa | |
| CCD FOV | 10*8mm |
| Nau'in kamara | Kamara dijital ta CCD dubu 130 |
| Tsarin kamara | Kulle sama/ƙasa tsarin na gani |
| Lokacin zagayowar kamara | 300ms |
| Nau'in alamar alama | Daidaitaccen sifar alamar gaskiya |
| Zagaye, murabba'i, lu'u-lu'u, giciye | |
| Pad da profile. | |
| Alamar girman | 0.5-6 mm |
| Alama lamba | Max: 4pcs |
| Tsaya lamba | Max.1 pc |
| Sigar inji | |
| Tushen wuta | AC: 220 ± 10%, 50/60HZ 2.2KW |
| Matsin iska | 4 ~ 6Kgf/cm² |
| Amfanin iska | ~ 5L/min |
| Yanayin aiki | -20C ~ +45°c |
| Yanayin zafi mai aiki | 30% -60% |
| Girman injin (ba tare da hasumiya ba) | 2570(L)*1210(W)*1509(H)mm |
| Nauyin inji | ~ 1500kg |
| Abubuwan buƙatun ɗaukar kayan aiki | 650kg/m² |
Cikakkun na'ura:
Marufi da bayarwa:
Lokacin jagora: 10-20 kwanakin aiki.
Mahimman kalmomi:GKG solder manna firinta, GKG solder pate bugu inji H1500, GKG cikakken firinta ta atomatik, smt solder manna printer, cikakken atomatik solder manna printer, GKG printer, China solder manna inji, na'urar buga allo.
TYtech kamfani ne da ke kerasake mayar da tanda, kalaman soldering inji, karba da wuri inji, solder manna printer, mu kuma muna bayarwasmt peripheral kayan aiki, smt handling machine, smt kayayyakin gyarada dai sauransu.
FAQ:
Q. Menene buƙatun ku na MOQ don injin?
A. 1 saita buƙatun moq don injin.
Tambaya. Wannan shine farkon da na fara amfani da irin wannan na'ura, yana da sauƙin aiki?
A: Akwai littafin jagora ko bidiyo na jagora wanda ke nuna maka yadda ake amfani da na'ura.
Tambaya: Idan injin yana da wata matsala bayan mun karɓa, ta yaya za mu yi?
A: Injiniyan mu zai taimaka wajen magance shi da farko, kuma sassan kyauta suna aika muku a cikin lokacin garanti na injin.
Tambaya: Kuna bayar da wani garanti ga injin?
A: Ee 1 shekara garanti za a bayar don inji.
Tambaya: Ta yaya zan iya yin oda tare da ku?
A: Kuna iya samun mu ta imel, whatsapp, wechat kuma tabbatar da farashin ƙarshe, hanyar jigilar kaya da lokacin biyan kuɗi, sannan za mu aiko muku da daftarin proforma tare da bayanan bankin mu.
