Siffar
Farashin GSE
Injin bugu ta atomatik na tattalin arziki
1. Features
Babban tsarin hangen nesa na sama / ƙasa, sarrafawa da kansa da daidaita haske, ruwan tabarau mai saurin motsi, daidaitaccen daidaitawar PCB da samfuri, yana tabbatar da daidaiton bugu na ± 0.025mm.
♦ High-daidaici servo motor drive da PC iko don tabbatar da kwanciyar hankali da daidaito na bugu, Unlimited image gane fasahar ganewa, tare da ± 0.01mm maimaita matsayi daidaito.
♦ Dakatar da bugu shugaban tare da musamman tsara high rigidity tsarin.Matsin lamba, gudu da bugun jini na scraper ana sarrafa su ta hanyar servo na kwamfuta don kiyaye uniform da ingantaccen ingancin bugu.
♦ Na zaɓi manual / atomatik allo aikin tsaftacewa kasa.Tsaftacewa ta atomatik, mara taimako na ƙasa na stencil, sarrafa shirye-shirye na bushe, rigar ko tsaftacewa, za a iya zaɓar tazara mai tsafta da yardar kaina, na iya cire sauran manna solder gaba ɗaya a cikin raga, da tabbatar da ingancin bugu.
♦ Haɗaɗɗen benci na duniya, wanda za'a iya saita shi don sanya thimbles da vacuum nozzles daidai da girman ma'aunin PCB, yin clamping da sauri da sauƙi.
♦ Multifunctional hukumar handling na'urar, wanda zai iya ta atomatik matsayi da kuma matsa PCB allon na daban-daban masu girma dabam da kuma kauri, tare da m Magnetic thimbles, injin dandali da injin akwatin, wanda zai iya yadda ya kamata shawo kan jirgin nakasawa da kuma tabbatar da uniform bugu tsari.
♦ Tare da "Windows XP" aiki dubawa da ayyuka masu wadata software, yana da kyakkyawan yanayin tattaunawa na mutum-mashin, sauƙin aiki, dacewa, sauƙin koyo da sauƙin amfani.
Yana da aikin sautin gano kansa na kuskure da ƙararrawar haske da kuma haifar da dalilin kuskure.
Komai mai gefe ɗaya ko mai gefe biyu na PCB zai iya aiki.
Yana iya daidai buga pads tare da farar 0.3mm.
Cikakken Hoton
Ƙayyadaddun bayanai
Ayyukan inji | |
Maimaita daidaiton matsayi | ± 0.01mm |
Buga daidaito | ± 0.025mm |
Bayani na NCP-CT | 7.5s ku |
HCP-CT | 19s/pcs |
Tsari CT | 5 min |
Canza layin CT | 3 min |
Sigar sarrafa Substrate | |
Matsakaicin girman allo | 400*340mm, 530*340mm (zaɓi) |
Girman allo Min | 50*50mm |
Kaurin allo | 0.4 ~ 6 mm |
Kewayon inji kamara | 528*340mm |
Matsakaicin nauyin allo | 3kg |
Fitar da allo | 2.5mm |
Tsawon allo | 15mm ku |
Gudun sufuri | 900± 40mm |
(Max) Gudun sufuri | 1500mm/s max |
Hanyar sufuri | Mataki daya |
Hanyar watsawa | Hagu zuwa dama |
Dama zuwa hagu | |
A ciki da waje guda | |
Tsarin tallafi | Magnetic pn |
Taimako toshe | |
Teburin sama na hannu | |
Jirgin damp | Manual saman matsi |
Matse gefe | |
Siffofin bugawa | |
Saurin bugawa | 10-200mm/s |
Matsin bugawa | 0.5-10 kg |
Yanayin bugawa | Daya/biyu |
Nau'in Queegee | Roba, skeegee ruwa (kwana 45/55/60) |
Kashe-kashe | 0-20mm |
Sanp gudun | 0-20mm/s |
Girman firam ɗin samfuri | 470*370mm-737*737mm (kauri 20-40mm) |
Yanayin matsayi na ragar karfe | Matsayin hannu |
Tsaftace ma'auni | |
Hanyar tsaftacewa | Dry, rigar, vaccum, yanayi uku |
Tsarin tsaftacewa | Nau'in drip na gefe |
Tsaftacewa bugun jini | Ƙirƙirar atomatik |
Matsayin tsaftacewa | Bayan tsaftacewa |
Gudun tsaftacewa | 10-200mm/s |
Yin amfani da ruwa mai tsaftacewa | Daidaitacce ta atomatik/da hannu |
Tsaftace amfani da pater | Daidaitacce ta atomatik/da hannu |
Ma'aunin hangen nesa | |
CCD FOV | 10*8mm |
Nau'in kamara | 130 dubu CCD kyamarar dijital |
Tsarin kamara | Kulle sama/ƙasa tsarin gani |
Lokacin zagayowar kamara | 300ms |
Nau'in alamar alama | Daidaitaccen sifar alamar gaskiya |
Zagaye, murabba'i, lu'u-lu'u, giciye | |
Pad da profile | |
Alamar girman | 0.5-5 mm |
Alama lamba | Max.4pcs |
Tsaya lamba | Max.1 pc |
Sigar inji | |
Tushen wuta | AC 220 ± 10%, 50/60Hz 2.2KW |
Matsin iska | 4-6kgf/cm² |
Amfanin iska | ~ 5L/min |
Yanayin aiki | -20°C ~+45°C |
Yanayin yanayin aiki | 30% -60% |
Girman injin (ba tare da hasken fure ba) | 1152(L)*1362(W)*1460(H)mm |
Nauyin inji | 900kg |
Bukatun ɗaukar kayan aiki | 650kg/m² |