Igwe nbipute Stencil dị elu zuru oke F450
Oke F450+™ | |
PCB parameters | |
Oke bọọdụ kacha | 450mm x 350mm |
Nha bọọdụ mini | 50mm x 50mm |
PCB ọkpụrụkpụ | 0.4mm ~ 6mm |
Akwụkwọ agha | Oke.PCB diagonal 1% |
Ibu bọọdụ kacha | 6 n'arọ |
Oghere ọnụ bọọdụ | nhazi ka 3mm |
Ọpụpụ kacha ala | 20mm |
Ọsọ nnyefe | 1500mm/s (Max) |
Ogologo nnyefe na ala | 900± 40mm |
Ntuziaka nnyefe | Akaekpe-aka nri, akanri-ekpe, akaekpe-ekpe, akanri- akanri |
Usoro nnyefe | Ụgbọ okporo ígwè nnyefe nke otu ọkwa |
Usoro nchịkọta PCB | Ngwanrọ nwere ike ịgbanwe nrụgide mpụta na-agbanwe (Nhọrọ: multipoint na ala ma ọ bụ oghere akụkụ ma ọ bụ oghere dum). |
Usoro nkwado osisi | Magnetik thimble, contour blocks, pụrụ iche workpiece fixture |
Mpempe akwụkwọ mbipụta | |
Isi obibi akwụkwọ | Moto egwuregwu kwụ ọtọ abụọ kwụụrụ onwe ya |
Nha etiti ndebiri | 370mm x 470mm (470 ekpe / aka nri etinye) ~ 737 mm x 737 mm |
Ebe obibi akwụkwọ kacha | 450mm x 350mm |
Ụdị scraper | Stencil scraper / rubber scraper (n'akuku 45 ° / 55 ° / 60 ° họrọ dị ka teknụzụ obibi) |
Ụdị mbipụta | Otu ma ọ bụ abụọ scrapers obibi |
Ogologo nbibi | 0.02 mm na 12 mm |
Ọsọ mbipụta | 6 mm / s ruo 200 mm / s |
Nrụgide obibi akwụkwọ | 0.5kg ruo 10kg |
mmegharị obibi akwụkwọ | ± 250 mm (si na etiti) |
Oke onyonyo | |
Ebe nlele (FOV) | 6.4mm x 4.8mm |
Okpokoro nhazi mpaghara | X,Y:±7.0mm θ:±2.0° |
Ụdị ntụaka | Ebe ntụaka ọkọlọtọ (lee ọkọlọtọ SMEMA), pad / oghere |
Sistemụ igwefoto | Igwefoto n'otu n'otu, Sistemụ onyonyo onyonyo elu/ala, n'ọkwa geometric dakọtara |
Paragraf arụmọrụ | |
Ndozi onyonyo ziri ezi ugboro ugboro | ±12.5μ(±0.0005") @6 σ,Cpk≥2.0 |
Na-ebi akwụkwọ ziri ezi ugboro ugboro | ±25μ(±0.001") @6 σ,Cpk ≥ 2.0 |
Oge okirikiri | Ihe na-erughị 7.5s |
Dochie oge ahịrị | Ihe na-erughị 5mins |
Akụrụngwa | |
Ike | AC220V±10%,50/60HZ,15A |
Ikuku emetụtara | 4 ~ 6Kg / cm2, 10.0 tube |
Sistemụ arụmọrụ | Windows XP |
Nha akụrụngwa | 1140mm(L) x 1400mm(W) x 1480mm(H)(Agụnyela ihuenyo na agba ọkụ dị elu) |
Ibu akụrụngwa | Ihe dị ka 1000kg |