Njirimara
Atụmatụ:
1. Jiri sistemu servo iji kwado ndokwa nke ọma.
2. Jiri okporo ụzọ nduzi na-agba ọsọ dị elu na moto ntụgharị ugboro ugboro na-ebubata iji kwọọ oche scraper iji hụ na nbipụta ziri ezi.
3. Enwere ike ịmegharị ihe nkedo na-ebipụta 45 degrees n'elu iji dozie ya, nke dị mma maka ihicha na dochie ihuenyo mbipụta na scraper.
4. Enwere ike imezi oche scraper azụ na azụ ka ịhọrọ ebe obibi akwụkwọ kwesịrị ekwesị.
5. Plywood na-ejikọta ọnụ nwere oghere a na-edozi na PIN, nke dị mfe iji wụnye ma gbanwee, ọ dịkwa mma maka mbipụta otu na akụkụ abụọ.
6. Usoro nhazi usoro na-anabata mmegharị nchara nchara, jikọtara ya na mgbazi X, Y, Z na nhazi nke ọma nke PCB ebipụtara, nke dị mfe na ngwa ngwa.
7. Nabata 2N PLC na njikwa ihuenyo mmetụ mmadụ na-ebubata, dị mfe, dị mma na nke dabara adaba maka mkparịta ụka mmadụ-igwe.
8. Enwere ike ịtọ otu ụzọ na ụzọ abụọ, usoro mbipụta dị iche iche.
9. Ọ nwere ọrụ nchịkọta akpaka, nke dị mma maka ọnụ ọgụgụ nke mmepụta mmepụta.
10. Nkuku nke scraper na-agbanwe agbanwe, ihe nchara ígwè na ihe nkedo roba dabara adaba.
11. Onye na-ahụ maka igwe mmadụ nwere ọrụ nchekwa ihuenyo iji chebe ndụ ọrụ nke onye na-ahụ maka igwe.
12. Site na nhazi mmemme pụrụ iche, oche mpempe akwụkwọ na-ebi akwụkwọ dị mfe ịhazi.
13. Enwere ike igosi ọsọ nke ibipụta na ntanetị nke igwe mmadụ, enwere ike gbanwee ma chịkwaa dijitalụ.
Foto zuru ezu
Nkọwapụta
Nlereanya | TYtech S600 |
Akụkụ | 1400*800*1680mm |
Nha ikpo okwu | 350 × 600mm |
PCB nha | 320 × 600mm |
Nha ndebiri | 550×830mm |
Ọsọ mbipụta | 0-8000mm/min |
PCB ọkpụrụkpụ | 0-50mm |
PCB mma n'iji ya gee ntị nso | N'ihu/akụkụ ± 10mm |
Ịnye ọkụ | 1PAC220V 50/60HZ |
Ogologo ikpo okwu | 850± 20mm |
Nzizi nkwugharị | ± 0.01mm |
Ọnọdụ ọnọdụ | N'èzí/ oghere ntụaka |
Ibu | Ihe dịka 300kg |