Professional SMT Solution Provider

Thetsani mafunso aliwonse omwe muli nawo okhudza SMT
mutu_banner

V-Cut PCB Separator Component Lead Cutting Circular Blade Machine TYtech-3S

Kufotokozera Kwachidule:

Manual PCB v-cut makina

1. Kulamulira ndi microcomputer, kukhazikika kwakukulu ndi malo olondola.

2. Kuthamanga kwapamwamba kumatha kusintha zotsatira zodula, pangani matabwa kutali ndi burr.

3. Tsamba kutalika pang'ono kusintha mu 0 kuti 2mm, nsanja kutalika chosinthika mu 0 kuti 50mm, kuti agwirizane pcb wa thinckness osiyana, ndi kuthetsa vuto la kuya osiyana V-kagawo.

4. Pamanja anapereka udindo kusiya basi malinga ndi kutalika kwa PCB.


  • Mtundu:TYtech
  • Chitsanzo:Chithunzi cha TYtech-3S
  • Dimension:880*420*320mm (L*W*H)
  • Utali Woyenera wa PCB:Palibe malire
  • Kuchepetsa liwiro:300 ~ 500mm / s.
  • Kudula makulidwe:0.6-5.0 mm
  • Mtunda wocheperako kuchokera ku v-groove:1 mm
  • Voteji:220 V/50HZ kapena 110V
  • Kutalika kwa gawo lalikulu:20 mm
  • Kulemera kwa makina:52kg pa
  • Nthawi yotsimikizira makina:1 chaka
  • Nthawi yotsogolera:15 masiku
  • Tsatanetsatane wa Zamalonda

    Zolemba Zamalonda

    PCB Depaneling Machine TY-3S

    Chithunzi 12

    Chitsanzo: TY-3S

    Mawonekedwe

    1. Ndi njira yapadera yodulira, bolodi yozungulira imadulidwa ndi masamba asanu ndi limodzi.Ndi gulu lopangidwa ndi tsamba limodzi lapamwamba ndi limodzi lapansi , komanso ndi gawo locheka.Pali magulu A, B, C, atatu.Njira yonse yodulira imagawidwa m'magawo atatu kuchokera ku gulu A tsamba lomwe limadula 40% bolodi kenako kupita ku gulu B mpeni wodula podula poyambira ndi gulu A kuti amalize 40% ina .20% yomaliza imadulidwa ndi tsamba la gulu C ndikumaliza .chifukwa voliyumu iliyonse yodula ndi yaying'ono, kupsinjika komwe kumapangidwa panthawi yodulira kunatsika ndi 80% poyerekeza ndi kudulidwa kwachikhalidwe panthawi imodzi.

    Choncho m'mphepete mwa bolodi ndi pamwamba pake zimakhala zosalala popanda kumenyana.Pakadali pano, ndi makina okhawo omwe angatsimikizire mbale ya aluminiyamu popanda kupunduka mutatha kudula.

     

    2. Chifukwa cha kudula kangapo, njira yodulira imakhala yosalala kwambiri ndipo imathandizira kwambiri kuthekera kwa malo a V-CUT groove.
    Ngakhale mutakhala ndi malo osaya a V-CUT, bolodi silingalumphe kuchokera pamasamba, kupewa zovuta.

     

    3. Chifukwa kudula mphamvu ya tsamba ndi yaing'ono.abd yokhala ndi chitsulo chothamanga kwambiri chomwe chimatumizidwa kuchokera ku Sweden.kukhazikika kwa tsamba kunakula kwambiri, ndipo moyo wonse ukhoza kukhala chaka chimodzi kapena kuposerapo podula bolodi la aluminiyamu.
     

    4. Masamba onse odulira amawunikidwa ndi chida choyezera kusokoneza kwa laser cha Excitation double-frequency laser interference.Onetsetsani kuti mpeni womalizayo ukhoza kupitiriza kudula mipata yomwe idadulidwa kale ndi mpeni wakale. The jitter of mpeni point ndi yosakwana 0.02mm.Onetsetsani kuti mudula bwino.

    Chithunzi 15
    Chithunzi cha 16

    Zithunzi za TYtech-3S

    Chitsanzo

    TYtech-3S yokhala ndi nsanja ya 2.4M

    Dimension

    880*420*320mm (L*W*H)

    Utali Wokwanira wa PCB

    Palibe malire

    Kudula liwiro

    300 ~ 500mm / s.

    Kudula makulidwe

    0.6-5.0 mm

    Mtunda wocheperako kuchokera ku v-groove

    1 mm

    Voteji

    220 V/50HZ kapena 110V

    Kutalika kwa gawo lalikulu

    20 mm

    Kulemera kwa makina

    52kg pa

    Nthawi ya Warranty Machine

    Chaka chimodzi

     

    Chojambula choyika makina:

    微信截图_20220323140307
    Chithunzi 6
    Chithunzi 1

  • Zam'mbuyo:
  • Ena: