Fa'ato'a atoa le Lomitusi Stencil High Accuracy F600
TYtech Full Auto Stencil Lomitusi F600
1. O le PCB ua fafagaina i totonu o le masini o le masini lomitusi faʻapipiʻi solder otometi i luga o le fusi o le conveyor e ala i le masini faʻapipiʻi laupapa otometi.
2. O le masini lomitusi fa'apipi'i solder e maua le pito autu o le PCB ma maua ai
3. Fa'anofo le Z-fa'avaa i luga i le tulaga o le ipu vacuum plate
4. Faʻaopoopo le masini e faʻapipiʻi ai le PCB i se tulaga faʻapitoa
5. O le va'ai va'ai (mea pueata lomitusi) fa'agasolo malie i le fa'amoemoe muamua o le PCB
6. O le mea pu'eata o le masini lomitusi e su'e le fa'ailoga (point point) i lalo o le mata uamea fetaui
7. O le masini e fa'agaoioia le stensil lolomi e fa'aogatasi ai ma le PCB, e mafai e le masini ona fa'agaoioi le stensil i le X, Y axis fa'atonuga ma i le itu spindle.
8. O le stensil ma le PCB o loʻo faʻaogaina, o le Z-frame o le a agai i luga, ma le PCB e paʻi i le pito i lalo o le stencil.
9. O le taimi lava e siitia ai i le nofoaga, o le a tulei e le scraper le paʻu solder e taʻavale i luga o le stencil ma lolomi i luga o le PAD (pad) tulaga o le PCB e ala i pu i le stencil.
10. A maeʻa le lolomiga, o le Z-faʻavaa e alu i lalo e vavae ese le PCB mai le uamea.
11. O le masini lomitusi faʻapipiʻi solder otometi e auina atu le PCB i le isi gaioiga
12. Otometi atoatoa solder faapipii masini lomitusi ona maua ai lea o le isi PCB e lolomi
13. Faia le faiga lava lea e tasi mo le isi PCB, na o le faaaogaina o le squeegee lona lua e lolomi i le itu faafeagai.
F600+™ Parameter | |
PCB tapula'a | |
Le tele o le laupapa | 650mm x 340mm |
Laititi o le laupapa | 50mm x 50mm |
PCB mafiafia | 0.4mm~6mm |
Warpage | Max.PCB diagonal 1% |
Max mamafa laupapa | 6Kg |
Avanoa pito o le laupapa | seti i le 3mm |
Avanoa pito i lalo | 20mm |
Saosaoa felauaiga | 1500mm/s(Max) |
Ole maualuga ole felauaiga ile eleele | 900±40mm |
Fa'atonuga o felauaiga | Tauagavale-Taumatau, Taumatau-Tauvale, Tauagavale-Tauvale, Taumatau-Taumatau |
Auala fa'asalalau | E tasi le tulaga nofoaafi felauaiga |
auala pikiina PCB | E mafai e le polokalame ona suia le mamafa o le pito i tua (Filifili: multipoint i le pito i lalo poʻo le vacuum vacuum poʻo le vacuum atoa). |
Metotia lagolago a le Komiti Fa'atonu | Fa'amau fa'amaneta, poloka ta'amilosaga, mea faigaluega fa'apitoa |
Lomitusi tapula'a | |
Ulu lolomi | E lua ta'avale liki sa'o tuto'atasi |
Tele fa'avaa mamanu | 650mm x 400mm~850mm x 750mm |
Ituaiga siki | Stencil scraper / pa'u pa'u (matau 45°/55°/60° filifili e tusa ai ma tekinolosi lomitusi) |
Faiga lolomi | Lomitusi taitoatasi pe lua |
Fa'amauina umi | 0.02 mm i le 12 mm |
Saosaoa lomitusi | 6 mm/s i le 200 mm/s |
Omiga lolomi | 0.5kg i le 10Kg |
Lomitusi gaioiga | ±250 mm (mai le ogatotonu) |
Fa'ailoga ata | |
Va'aiga va'aiga(FOV) | 6.4mm x 4.8mm |
Lau'ele'ele fetu'una'i | X,Y:±7.0mm θ:±2.0° |
Tulaga fa'asinomaga | Fa'asinomaga masani (silasila SMEMA tulaga), fusipa'u/pu |
Meapueata faiga | Mea pu'eata ta'ito'atasi, Luga/lalo fa'ata'ita'iga ata fa'apitoa, fa'atulagaina fa'atusa fa'atusa |
Fa'asologa o galuega | |
Fa'atonuga fa'atusa fa'asolosolo sa'o | ±12.5μ(±0.0005") @6 σ,Cpk≥2.0 |
Lomiga faafia sa'o | ±25μ(±0.001") @6 σ,Cpk ≥ 2.0 |
Taimi ta'amilosaga | I lalo ifo o le 7.5s |
Sui taimi laina | E itiiti ifo i le 5 minute |
Meafaigaluega | |
Malosiaga | AC220V±10%,50/60HZ,15A |
Ea oomi | 4~6Kg/cm2, 10.0 paipa |
Faiga faiga | Windows XP |
Tele o meafaigaluega | 1330mm(L) x 1400mm(W) x 1480mm(H)(Aua le aofia ai le lau ma le tolu-lanu malamalama maualuga) |
Meafaigaluega mamafa | E tusa ma le 1100kg |
upu autu:Fully Auto screen lomitusi, lomitusi stensil, smt screen stencil lomitusi, lomitusi faakomepiuta otometi atoa, smt stencil lomitusi, smt screen lomitusi, smt screen lomitusi, stenil lomitusi gaosi, Saina gaosi, Saina gaosi screen.