Professional SMT Solution Provider

Solve any questions you have about SMT
head_banner

SMT Automatic Tape Cutting Machine TYtech-680

SMT Automatic Tape Cutting Machine TYtech-680 Featured Image
  • SMT Automatic Tape Cutting Machine TYtech-680

Short Description:

This machine is used for SMT tape cutting equipment, For the pick and place tape recovery. Usually used for the pick and place without recovery function, and the waste tape is recycled with garbage can, manually cut with scissors; SMT automatic tape cutting machine is completely replace the manual cutting tape, and the realization of the tape, film can shear function; The scrap tape shear is recycled to the SMT tape cutting machine.

The cutted tape and film falling in the SMT material recycling drawer of the tape cutting machine. Convenient staff finally concentrated treatment. Not only give employees a good working environment, and also can better demonstrate a good 5S management ability (there are examples in their customers to visit, to their production line 5S praise, especially at the SMT lines)
  • Brand: TYtech
  • Model: 680
  • Lead time: 8-15 working days
  • Warranty: 1 year

    • Product Detail

    Product Tags

    Specifications:

    Dimensions L800×W295×H520mm Cutting mode Circular Running Cutting
    Transmission mode Gear assembly Driving mode Motor + synchronous belt
    Unloading Range L660*W60mm Cutting Range L590*W25mm
    Weight 35KG Cutting Speed 4m/min
    Supply Power AC220V 、50~60HZ Current 1A
    Control System PLC Tape box induction: Photoelectric induction

    1. This model of smt automatic tape cutting machine is suitable for SMT with a variety of materials, from the thick 0.05mm film to the 1.5mm band can be easily cut;

    2. Patent (patent number ZL201520023125.6) equipment beautiful, small footprint, Conviniently to use and storage. The specific size can according to the customer the feeder under custom recovery area.

    3. The blade material: imported SKD-11, guaranteed for one year without sharpening.

    4. The patent (Patent No. ZL201530007763.4) rolling cutter cutting system, When cutting on the cutter bottom eight spring tension in the cutter edge plane and tangent point contact. To solve the shortcomings of the common market under the knife to cut the blade wear faster, where our shear belt machine warranty for two years (including blade), four knife can be turned to use, can be repeatedly grinding cutter. At the same time, it completely solves the phenomenon that the traditional belt shears use the knife blade to cut back and forth frequently.

    5. Microcomputer intelligent control, cutting time and length can be set. One button start / stop, easy to operate.

    6. With waste recycling safety sensor, when the material box off the device to stop working automatically, It can prevent employees from hand from the bottom of the device tool work area to ensure the safety of equipment. Ensure the pure shearing after all fall into the recovery box at the same time.

    7. The machine shear stroke two ends limit limit switch, beyond the trip power outage. To prevent the photoelectric switch failure after the tool out of the limit motor has been working, burned motor caused short circuit situation.

    8. The machine warranty for one year, permanent after-sales service. 

  • Previous:
  • Next:

    • RELATED PRODUCTS