Flying probe test is to use 4, 6 or 8 probes to perform high-voltage insulation and low-resistance continuity tests (open and short circuits of the test circuit) on the circuit board without making a test fixture. It is very suitable for testing small batch samples. At present, the production cost of the test frame of the bed of nails tester ranges from thousands of yuan to tens of thousands of yuan, and the production process is complicated, and a drilling machine must be occupied, and the debugging process is relatively complicated. The flying probe test uses the movement of the probe to measure the network of the PCB or PCBA, which greatly increases the flexibility. There is no need to change the fixture to test different circuit boards. The circuit board can be directly installed to run the test program. The test is extremely convenient. It saves the test cost, reduces the time of making the test frame, and improves the efficiency of shipment.
Post time: Oct-21-2024
