Daabacaha koollada Alxanka leh ee GKG oo dhammaystiran H1500
| Waxqabadka Mashiinka | |
| Ku celi saxnaanta booska | ± 0.015mm |
| Saxnaanta daabac | ±0.03mm |
| NCP-CT (kuma jiraan nadiifinta iyo daabacaadda) | <12 sekan |
| Habka CT | 6 daq |
| Beddel khadka CT | 4 daq |
| Halbeegga farsamaynta substrate | |
| Max.cabbirka looxa | 1500*350mm |
| Min.cabbirka looxa | 80*50mm |
| Dhumucda looxa | 0.8-6mm |
| Kala duwanaanshaha farsamada kamarada | 1500*350mm |
| Miisaanka looxa ugu badan | 10kg |
| nadiifinta cidhifka looxa | 3.5mm |
| Dhererka looxa | 15mm pin |
| Xawaaraha gaadiidka | 900± 40mm |
| (Max) xawaaraha gaadiidka | 1500mm/s (Max) |
| Jihada gudbinta | Bidix ilaa midig |
| midig ilaa bidix | |
| gudaha iyo dibaddaba isku mid | |
| Nidaamka taageerada | Bir magnetic |
| Taageerada xannibaadda | |
| Miiska gacanta-sare | |
| Guddi qoyan | Buugga qoyaanka sare |
| Xajinta dhinaca | |
| Xuduudaha daabacaadda | |
| Xawaaraha daabac | 10-200mm |
| Cadaadis daabac | 0.5-15kg |
| Habka daabacaadda | Hal/laba jeer |
| nooca Gueegee | Caag/Xul-mareen (xagal 45/55/60) |
| Degdeg ah | 0 ~ 20mm |
| Xawaaraha degdega ah | 0 ~ 20mm/sek |
| Cabbirka qaab-dhismeedka qaab-dhismeedka | 720*300mm ~ 1800*750mm |
| Qaabka meelaynta mesh birta | Buugga |
| Xaddiga nadiifinta | |
| Habka nadiifinta | Faakiyuum qoyan oo qallalan |
| Nadiifinta xawaaraha sare | Nadiifinta tidde |
| Nidaamka nadiifinta | dhibicda sare |
| Nadiifinta istaroogga | Jiilka tooska ah |
| Meesha nadiifinta | Nadiifinta dhinaca midig |
| Xawaaraha nadiifinta | 10-200/sek |
| Nadiifinta isticmaalka dareeraha | Gacanta lagu hagaajin karo |
| Nadiifinta isticmaalka waraaqaha | Gacanta lagu hagaajin karo |
| Halbeegyada aragga | |
| CCD FOV | 10*8mm |
| Nooca kamarada | 130 kun oo kamarad dijital ah oo CCD ah |
| Nidaamka kamarada | Kor/hoos u xidh qaabdhismeedka indhaha |
| Waqtiga wareegga kamarada | 300ms |
| Noocyada calaamadaynta | Qaabka caamka caamka ah |
| Wareeg, afar gees ah, dheeman, iskutallaab | |
| Pad iyo profile. | |
| Calaamadee cabbirka | 0.5-6mm |
| Calaamadee lambarka | ugu badnaan:4pcs |
| Ka fogow nambar | Max.1pc |
| Halbeegga mashiinka | |
| Isha tamarta | AC:220 ± 10%, 50/60HZ 2.2KW |
| Cadaadiska hawada | 4 ~ 6Kgf/cm² |
| Isticmaalka hawada | ~5L/daqiiqo |
| Heerkulka shaqada | -20°c~+45°c |
| Qoyaanka deegaanka oo shaqaynaya | 30%-60% |
| Cabbirka mashiinka (la'aanteed) | 2570(L)*1210(W)*1509(H)mm |
| Miisaanka mashiinka | ~ 1500kg |
| Qalabka loo baahan yahay xakamaynta | 650kg/m² |
Faahfaahinta mashiinka:
Baakadaha iyo keenista:
Waqtiga hogaaminta: 10-20 maalmood oo shaqo.
Erayada FurahaDaabacaha koollada iibka ah ee GKG, Mashiinka daabacaadda alxanka ee GKG H1500, GKG oo buuxa daabace toos ah, smt daabacaha koollada alxanka, daabace koollada alxanka buuxa oo toos ah, Daabacaha GKG, Mashiinka dhejiska ee Shiinaha, mashiinka daabacaadda shaashadda.
TYtech waa shirkad inta badan wax soo saartafoornada dib u celi, Mashiinka alxanka hirarka, qaado iyo meel mashiinka, daabacaha koollada alxanka, sidoo kale waxaan bixinaaqalabka durugsan ee smt, mashiinka gacanta ku smt, smt spare partsiwm.
FAQ:
Q. Waa maxay shuruudaha MOQ ee mashiinka?
A. 1 dhigay shuruudaha moq ee mashiinka.
S. Kani waa kii ugu horeeyay ee aan isticmaalo mishiinka noocaan ah, ma fududahay in la shaqeeyo?
J: Waxa jira buug-gacmeed Ingiriisi ah ama fiidiyoow hage oo ku tusaya sida loo isticmaalo mishiinka.
S: Haddii mishiinka uu leeyahay wax dhibaato ah ka dib markii aan helno, sideen samayn karnaa?
A: Injineerkeena ayaa kaa caawin doona inuu xalliyo marka hore, iyo qaybo bilaash ah ayaa kuu soo diri doona muddada dammaanadda mashiinka.
S: Ma bixisaa wax dammaanad ah mashiinka?
J: Haa 1 sano oo dammaanad ah ayaa la siin doonaa mashiinka.
S: Sideen kuugu dalban karaa?
J: Waxaad noogu soo diri kartaa email ahaan, whatsapp, wechat oo aad ku xaqiijin kartaa qiimaha ugu dambeeya, habka dhoofinta iyo muddada lacag bixinta, ka dib waxaan kuu soo diri doonaa qaansheegta proforma oo leh faahfaahintayada bangiga.
