Muuqaal
Sifada:
1. Qalabaynta buufinta caadiga ah, preheating iyo unugyada alxanka, dhammaan habka alxanka waxaa lagu dhammeyn karaa meel mishiinka yar.
2. Qalabku wuxuu qaataa habka alxanka mawjada xulashada, tayada alxanka waa mid sareysa.
3. Raad yar, badbaadinta booska rakibaadda.
4. Isticmaalka nooca ugu dambeeya ee software-ka, interface-ka-mashiinka-bini'aadamku waa saaxiibtinimo, hawlgalkuna waa mid fudud oo sahlan in la fahmo.
5. La socodka wakhtiga dhabta ah ee habka alxanka iyo habsocodka duubista.
6. Hawlgalka nacasnimada, oo aad u habboon in la isticmaalo.Joogteynta alxanka ayaa wanaagsan, khatarta tayada waa la dhimay.
7. Waxay qabataa foornada daasadaha ee bamka elektromagnetic-ka caadiga ah, kaas oo aan lahayn qaybo xidhan oo ay fududahay in la ilaaliyo.
Faa'iido leh:
a Dhammaan hal mashiin, isla miiska dhaqdhaqaaqa XYZ waxay isku daraan qulqulka xulashada iyo alxanka, is haysta & shaqo buuxda.
b Dhaqdhaqaaqa guddiga PCB, biibiile iyo dheriga alxanka oo go'an.
c alxanka tayada sare leh.
d Waxa loo isticmaali karaa dhinaca khadka wax soo saarka, u dabacsan samaynta khadka wax soo saarka.
e Koontaroolka PC oo buuxa.Dhammaan halbeegyada waxaa lagu dejin karaa kombuyuutar waxaana lagu keydin karaa liiska PCB, sida jidka dhaqaaqa, heerkulka alxanka, nooca qulqulka, nooca alxanka, heerkulka n2 iwm, kartida raadraaca ugu fiican oo ay fududahay in lagu celiyo tayada iibinta.
Sawirka Faahfaahin
Tilmaamaha
Qaabka | TYO-300 |
Guud ahaan | |
Cabirka | L1220mm * W1000mm * H1650mm (kuma jiraan saldhigga) |
Awoodda guud | 5kw |
Awooda isticmaalka | 1--3kw |
Korontada | hal waji 220V 50HZ |
Miisaanka saafiga ah | 380KG |
Isha hawada Reuiqred | 3-5 Baararka |
socodka hawada loo baahan yahay | 8-12L/daqiiqo |
Cadaadiska N2 ee loo baahan yahay | 3-4 Baararka |
Socodka N2 loo baahan yahay | > 2 mitir kuyuub ah/saacaddii |
N2 loo baahan yahay | 》99.998% |
Loo baahan yahay daal | 500--800CMB/H |
CArrier ama PCB | |
Qaade | waxaa loo isticmaali karaa hadba sida loogu baahdo |
Aagga alxanka ugu badan | L400 * W300MM(cabbirka waa la beddeli karaa) |
dhumucda PCB | 0.2mm--6mm |
PCB cidhifka | >3mm |
Ckormeerid & Gaadiid | |
Xakamaynta | PC warshadaha |
Looxa rarista | Buugga |
looxa dejinta | Buugga |
Dhererka shaqada | 900+/-30mm |
Kor u qaadida ogolaanshaha | 100MM |
Gaadhida nadiifinta hoose | 30MM |
Miiska mooshinka | |
dhidibka dhaqdhaqaaqa | X, Y, Z |
Xakamaynta dhaqdhaqaaqa | Xakamaynta Servo |
Saxnaanta booska | +/- 0.1 mm |
Chassis | alxanka qaab dhismeedka birta |
Maareynta qulqulka | |
Duubka dareeraha | jet valve |
Awoodda taangiga qulqulka | 1L |
Haanta dareeraha ah | sanduuqa qulqulka |
Kahor kulayl | |
Habka kulaylka ka hor | Kuleyliyaha infrared ee hoose |
Awoodda kuleyliyaha | 3kw |
Kala duwanaanta heerkulka | 25--240c darajo |
Sdheri ka weyn | |
Tirada dheriga caadiga ah | 1 |
Awoodda dheriga alxanka | 15 kg / foornada |
Kala duwanaanshaha heerkulka alxanka | PID |
Waqti dhalaalid | 30--40 daqiiqo |
Heerkulka ugu badan ee alxanka | 350 C |
Kuleyliyaha alxanka | 1.2kw |
Ssanka ka weyn | |
Neef yar | qaabka gaarka ah |
Walxaha sanbabada | birta daawaha |
biibiile qalabaysan Standard | Qaabeynta caadiga ah: 5 xabbo / foornada (dhexroorka gudaha 4mm x 3pcs, 5mm, 6mm) |
Maamulka N2 | |
N2 kuleyliyaha | heerka |
Heerkulka heerkulka N2 | 0 - 350 C |
N2 isticmaalka | 1---2m3/h/sabaq |