Sebopeho
Melemo ea ho fofisa probe tester:
Tsoelo-pele ea teko e potlakileng;mekhoa ea teko ea theko e tlaase;ho feto-fetoha ha maemo bakeng sa phetoho e potlakileng;le maikutlo a potlakileng ho baqapi nakong ea mohato oa mohlala.
Bahlahlobi ba libethe tse 6-pin kapa tse 8 Bahlahlobi ba lifofane ba ka sebelisa tlhahlobo e mahlakoreng a mabeli, joalo ka tlhahlobo ea lipekere, ho boloka nako ea ho phethola boto.
Liteko tse ncha tse fofang li sebelisoa bakeng sa mesebetsi e bonolo ea ho lula, 'me matla a selemo a nako ea selemo a ka fokotsoa ho 10g (0.1N).Le hoja nako ea teko e eketsehile hanyenyane, letšoao la ho phunya le batla le sa bonahale.
Ka hona, ha ho bapisoa le ICT ea setso, nako e hlokahalang bakeng sa tlhahlobo ea probe ea sefofane e feta matšeliso ka ho fokotsa kakaretso ea nako ea tlhahlobo.
Melemo ea ho sebelisa sistimi ea tlhahlobo ea probe e fofang e feta bofokoli.Mohlala, sistimi e joalo e fana ka ts'ebetso ea kopano ho qala tlhahiso lihora tse 'maloa feela kamora ho amohela faele ea CAD.Ka hona, liboto tsa prototype li ka lekoa lihora tse ngata kamora kopano, ho fapana le ICT, moo nts'etsopele ea liteko tse theko e phahameng le lisebelisoa li ka liehisang ts'ebetso ka matsatsi kapa likhoeli.Litsamaiso tsa tlhahlobo ea lifofane tse fofang li boetse li fokotsa nako ea tlhahlobo ea pono ea "sengoloa sa pele" sa lihlahisoa tse ncha, e leng sa bohlokoa hobane boto ea pele hangata e etsa qeto ea litšobotsi tsa liteko tsa li-UUT tse setseng.
【Likarolo tsa Bohlokoa】
① Li-probes tse robeli tse mahlakoreng a mabeli ka theko e ntle ka ho fetisisa
② Ho nepahala ho phahameng (sephutheloana sa 01005 se tšehelitsoe)
③ Sistimi ea seporo e nepahetseng e nang le boemo bo holimo bo nepahetseng
④ Phetiso ea Marang-rang / Inline e tšehetsoa
⑤ Ho fetisoa ka holimo
⑥ Teko e tsitsitseng ea LCRD e tšehelitsoe
Setšoantšo se qaqileng
Litlhaloso
| Mohlala | TY-8Y | |
| Tlhaloso e kholo | Bonyane Chip | 01005 (0.4mm x 0.2mm) |
| Min Compenent Pin Spacing | 0.2 limilimithara | |
| Min Contact Pad | 0.15 limilimithara | |
| Lipatlisiso | Lihlooho tse 4(Holimo)+4 Lihlooho(Ka Tlase) | |
| Probe elastic force | 120g (ea kamehla) | |
| Probe Rated Stroke | 1.5 limilimithara | |
| Mefuta ea lintlha tse lekiloeng | Lintlha tsa liteko, li-Pads, li-Dlectrodes tsa Sesebelisoa Lihokelo, Likarolo tse sa Tloaeleheng | |
| Lebelo la teko | Max 25 Mehato/Mots | |
| Pheta-pheta | ± 0.005mm | |
| Lebanta le phahameng | 900±20mm | |
| Lebanta Bophara | 50mm ~ 630mm | |
| Track bophara ba phetoho | Auto | |
| Inline Mode Offline Mode | Ka ho le letšehali (Ka ho le letona) Ka ho , Ka ho le letona (Ka ho le letšehali) Ka ntle Ke Tlohile Ka Ntle | |
| Optics | Khamera | Lik'hamera tse 4 tse mebala, 12M Pixels |
| Sensor ea ho tlosoa ha Laser | 4 Sets | |
| Sebaka sa Teko | Sebaka sa Tlhahlobo sa Max | 640mm x 600mm |
| Sebaka sa Teko sa Min | 60mm x 50mm | |
| TLHOKOMELISO | ≤50 limilimithara | |
| BOT Hlakola | ≤50 limilimithara | |
| Boto ea Boto | ≥3mm | |
| Botenya | 0.6mm ~ 6mm | |
| Boima ba boima ba PCBA | 10kg | |
| Motsamao Mekhahlelo | Probe Return Height | E hlophisitsoeng |
| Probe Tobetsa Botebo | E hlophisitsoeng | |
| Probe Soft Landing | E hlophisitsoeng | |
| Z Bohole | -3 limilimithara ~ 53 limilimithara | |
| XY / Z Ho potlakisa | Boholo ba 3G / Max 20G | |
| XYZ Mokhanni | Linear Motor | |
| XYZ lekanya | Sekala sa linear | |
| XY Lead Rail | P-Grade precision guide seporo | |
| Teko Bokgoni | Bahanyetsi | 1mΩ ~ 1GΩ |
| Li-capacitors | 0,5pF ~ 1F | |
| Li-inductors | 0.5uH ~ 1H | |
| Diode | Ee | |
| Zener diode | 40V | |
| BJT | Ee | |
| Relay | 40V | |
| Li-FETs | Ee | |
| Mohloli oa Hajoale oa DC | 10nA ~ 1A | |
| Mohloli oa motlakase oa kamehla oa DC | 0 ~ 40V | |
| Mohloli oa Hajoale oa AC | 100 ~ 500mVrms(200hz ~ 1Mhz) | |
| Panel Test | Ee | |
| 2D Barcode | Ee | |
| PCBA Deformation Matšeliso | Ee | |
| Khokahano ea MES | Ee | |
| Teko ea LED | Khetho | |
| Bula Pin | Khetho | |
| Lenaneong la boto | Khetho | |
| Vayo DFT (6 CAD) | Khetho | |
