Mofani oa Tharollo ea SMT ea Setsebi

Rarolla lipotso leha e le life tseo u nang le tsona mabapi le SMT
hlooho_banner

China Wholesales Reflow Oven, SMT Reflow Soldering Oven TYtech 1220

Tlhaloso e Khutšoanyane:

Etella pele ka ontong ea mahala ea Hot Air Reflow TYtech 1220

Libaka tse 12 tsa ho futhumatsa le libaka tse 2 tse pholileng

Boima: 6300 * 1320 * 1490mm

Boima ba 'mele: 2600kg

Tlhaloso ea sehlahisoa: SMT reflow soldering machine, libaka tse futhumatsang: holimo ho 12, botton 12. Libaka tse pholileng: libaka tsa 2 tse pholileng.


  • Palo ea libaka tsa ho futhumatsa :Holimo ho 12/ tlase ho 12
  • Palo ea libaka tsa ho pholisa: 2
  • Bolelele ba libaka tsa ho futhumatsa:4640 limilimithara
  • Mokhoa oa ho futhumatsa:Moea o chesang
  • Mokhoa oa ho Pholisa:Pholiso ea moea e qobelloang
  • Max.Bophara ba PCB:400mm
  • Bophara ba lebanta la Mesh:450 limilimithara
  • Tsela ea phetiso:L→R(khetho: R→L)
  • Transmission Net Height:900±20mm
  • Mofuta oa phetiso:Mesh le ketane
  • Phepelo ea motlakase:5 line 3 phase 380V 50/60HZ
  • Tšebeliso e tloaelehileng ea matla:10-12KW
  • Lintlha tsa Sehlahisoa

    Li-tag tsa Sehlahisoa

    Etella Pele Ho Hlakola Moea o Chesang Oven TY-1220

    回流焊F12

    Selelekela:

    1. Khomphuta ea brand le Siemens PLC tsamaiso e bohlale ea ho laola, taolo e phahameng ea mocheso o nepahetseng ke ± 1-2 ℃ (haeba kotsi ea kotsi ea k'homphieutha, e ka lemoha mosebetsi oa off-line, e se ke ea ama tlhahiso) le ho etsa bonnete ba hore tsamaiso ea taolo e teng. e tsitsitseng le e ka tšeptjoang;

    2. Sehokelo sa tšebetso sa Windows XP se nang le ts'ebetso e matla le e bonolo.

    3.E le ho netefatsa tšireletseho le ho tšepahala, 'mele oa silinda o ka phahamisoa ka bohona.

    4. Sesebelisoa se na le lebanta la letlooeng, se tsamaisang hantle, ha se sisinyehe ebile ha se na deformation, se netefatsang lipalangoang tsa PCB tse boreleli.Mochine oa phetisetso ea tataiso ea synchronous le khokahano ea inthanete ea mochini oa SMT e netefatsa hore e tataisa ho nepahala ho feto-fetohang le bophelo ba ts'ebeletso e phahameng.

    5. Automatic control lubrication system le automatic lubrication transmission chain.

    6.Taolo eohle ea ho futhumatsa sebaka ka komporo ea PID (sebaka se kaholimo sa mocheso le sebaka se tlase sa mocheso oa sebaka sa mocheso se ikemetseng, ho bolelang hore se ka arola mocheso oa sebaka sa mocheso, e le ho fokotsa matla a ho qala)

    7. Phetiso ea marang-rang / ketane ka komporo ho phethahatsa taolo eohle e koetsoeng ea loop, e ka kopanang le mefuta e fapaneng ea tlhahiso ea PCB ka nako e le 'ngoe.

    8. Ka molumo oa phoso le ts'ebetso ea alamo e bobebe.

    9. Ka mosireletsi oa leakage, etsa bonnete ba hore ts'ireletso ea ts'ebetso ea basebetsi le tsamaiso ea taolo.

    10.The a haha-ka UPS le jarolla ka ho iketsa tieho shutdown tsamaiso tiisetso khutlela welder ka matla kapa overheat u se ke ua senya PCB le mochine.

    11. The Jeremane ERSA lefatše etella pele microcirculation futhumatsang mokgwa wa, le ka holimo le ka tlaase ikemetseng moea microcirculation tsamaiso, mocheso tšoanang le mogote puseletso phahameng bokgoni, phahameng sebetsang hantle supercharged accelerated moea duct, haholo ntlafatsa ho potoloha ho potoloha moea o chesang, futhumatsa mocheso ka potlako metsotso e mashome a mabeli), matšeliso a mocheso bakeng sa katleho e phahameng, mocheso o phahameng oa ho cheseletsa le ho phekola;

    12. Sebaka se seng le se seng sa mocheso le se tlase se nang le sensor e ikemetseng ea mocheso, tlhahlobo ea nako ea sebele le matšeliso a sebaka se seng le se seng sa mocheso;

    13. E-ba le tsamaiso ea phasewete ea tsamaiso ea ts'ebetso, ho thibela liphetoho tse sa hlokahaleng tsa basebetsi ho mekhahlelo ea ts'ebetso, lirekoto tsa ts'ebetso ea tsamaiso ea ts'ebetso ea ts'ebetso ea mekhoa ea ho fetola mekhoa ea ho fetola mokhoa, ho ntlafatsa tsamaiso e loketseng.Bakeng sa ho boloka litlhophiso tsa lebelo la mocheso oa mosebelisi le Litlhophiso tsa curve ea mocheso, 'me e ka sebelisoa bakeng sa khatiso eohle ea data le curve;

    14. Fensetere ea taolo e kopantsoeng, sesebelisoa sa k'homphieutha, sekhahla sa teko, sekhahla sa khatiso le phetiso ea data li sebetsa habonolo, moralo oa motho.E na le sistimi ea tlhahlobo ea mocheso ea likanale tse tharo, e kanna ea lekola lintho ka nako efe kapa efe ka sekhahla sa 'nete sa mocheso (ntle le tlhahlobo e ngoe ea mocheso oa curve);

    15. Ho tloha tsamaisong ea machaba ea ho futhumatsa ka potlako ea theknoloji, sebelisa mofuta o hōlisang khalase o sebetsang hantle ka potlako, lebelo la ho pholisa le ka fihla ho 3.5 ~ 6 ℃/ SEC, tsamaiso e bonolo haholo;The ka ntle e qobelloang tsidifatso sesebediswa, etsa bonnete ba hore letheba kristale e le hantle (Khetho khetha lintho tse, tlhophiso e tloaelehileng bakeng sa ho qobelloa tlhaho moea tsidifatso).

    Tlhaloso:

    Mohlala

    TY-Tech 1220

      Sistimi ea ho futhumatsa Palo ea libaka tse futhumatsang Holimo ho 12/ tlase ho 12
    Palo ea libaka tsa ho pholisa 2
    Bolelele ba libaka tsa ho futhumatsa 4640 limilimithara
    Mokhoa oa ho futhumatsa Moea o chesang
    Mokhoa oa ho Pholisa Pholiso ea moea e qobelloang
    Molumo oa Exhaust 10m³/min * 2 exhauss
         Sistimi ea Conveyor Max.Bophara ba PCB 400mm
    Bophara ba lebanta la Mesh 450 limilimithara
    Tataiso ea phetiso L→R(khetho: R→L)
    Phetiso Net Height 900±20mm
    Mofuta oa phetiso Mesh le ketane
    Bophara ba seporo 400mm
    Lebelo la conveyor 0-2000mm/min
    Auto/manual Lubrication Standard
    Lehlakore la terene le tsitsitseng Seporo se ka pele se tsitsitse (khetho: seporo sa ka morao se tsitsitse)
    Likarolo tse phahameng Ka holimo le tlase 25mm
            

    Tsamaiso ea taolo

    Phepelo ea motlakase 5 line 3 phase 380V 50/60HZ
    Kakaretso ea matla 48KW
    Tšebeliso e tloaelehileng ea matla 10-12KW
    Nako ea ho futhumala 20 mets
    Temp.setting range Ho tloha mocheso oa kamore.Ho fihlela ho 300 ℃
    Temp.mokhoa oa ho laola PID haufi le taolo ea loop & ho khanna SSR
    Temp.ho laola ka nepo ±1℃
    Temp.ho kheloha ho PCB ±2℃
    Polokelo ea data Ts'ebetso ea data le boemo ba polokelo (80GB)
    Letlapa la nozzle Aluminium Alloy Plate
    Alamo e sa tloaelehang Mocheso o sa tloaelehang (mocheso o phahameng haholo / o tlase haholo)
    Boto e ile ea liha alamo Tower light:Ho futhumala ho mosehla, Botala-bo tlwaelehileng, Bofubedu-bo sa tlwaelehang
     Kakaretso Dimension(L*W*H) 6300*1320*1490mm
    Boima ba 'mele 2600kg
    Mmala K'homphieutha e bohlooho

     

     

    Mantsoe a sehlooho:SMT Reflow Oven, Lead free Reflow Oven, High end reflow Oven, Reflow Soldering Oven, Reflow Oven Manufacture, Led Reflow Oven, PCB Reflow Oven, Nitrogen Reflow Oven, Dual Lane Reflow Oven, China Reflow Oven, PCB Soldering Oven


    LBH:

    Q. Tlhokahalo ea hau ea MOQ bakeng sa mochini ke efe?

    A. 1 beha tlhokahalo ea moq bakeng sa mochine.

    P. Lena ke lekhetlo la pele ke sebelisa mochini oa mofuta ona, na o bonolo ho o sebetsa?

    A: Ho na le bukana ea Senyesemane kapa video e tataisang e u bontšang mokhoa oa ho sebelisa mochine.

    P: Haeba mochine o na le bothata leha e le bofe ka mor'a hore re o fumane, re ka etsa joang?

    A: Moenjiniere oa rona o tla thusa ho e rarolla pele, 'me likarolo tsa mahala li u romella ka nako ea tiiso ea mochine.

    P: Na u fana ka tiisetso efe kapa efe bakeng sa mochine?

    A: E, tiisetso ea selemo sa 1 e tla fanoa bakeng sa mochine.

    P: Nka odara joang ho uena?

    A: O ka re fihlela ka lengolo-tsoibila, whatsapp, wechat le ho netefatsa theko ea hae ea ho qetela, mokhoa oa ho romella le nako ea ho lefa, ebe re tla u romella invoice ea proforma e nang le lintlha tsa rona tsa banka ho uena.


  • E fetileng:
  • E 'ngoe: