Mofani oa Tharollo ea SMT ea Setsebi

Rarolla lipotso leha e le life tseo u nang le tsona mabapi le SMT
hlooho_banner

Reflow Soldering Oven SMT Original Manufacture Reflow Oven e nang le libaka tse 6 tsa ho futhumatsa

Tlhaloso e Khutšoanyane:

Moetsi oa mochini oa SMT 6 Libaka tse futhumatsang smt li etella pele ontong ea mahala ea phallo ea mahala

• Ka mofuta oa phetiso ea letlooeng le ketane

• Motlakase oa koloi o ka holimo

• Bophara ba lebanta la Mesh ke 400mm

• Boholo bophara ba PCB: 300mm


  • Lebitso:TYtech
  • Mohlala:6010
  • Palo ea libaka tsa ho futhumatsa:UP 6/TLASANE 6
  • Palo ea libaka tsa ho pholisa:Holimo ho 1/BOTTOM 1
  • Bolelele ba libaka tsa ho futhumatsa:2500MM
  • Lead time:15 matsatsi
  • Tiisetso:1 selemo
  • Lintlha tsa Sehlahisoa

    Li-tag tsa Sehlahisoa

    Reflow Soldering Oven SMT Original Manufacture Reflow Oven e nang le libaka tse 6 tsa ho futhumatsa

    M6 setšoantšo.jpg

    reflow ontong M6 open.jpg

    E etsangreflow ontongetsa?

    Reflow ontongke ho romela boto ea potoloho e nang le likarolo tsa SMD tse kentsoeng ka kamoreng ea reflow reflow ea SMT.Ka mor'a mocheso o phahameng, pente ea solder e sebelisetsoang ho solder likarolo tsa SMD e qhibiliha ka mokhoa oa mocheso o phahameng oa moea o chesang ho etsa phetoho ea mocheso oa reflow, e le hore likarolo tsa SMD le potoloho li qhibilihe.Li-pads tse holim'a boto li kopantsoe ebe li pholile hammoho.

    Selelekela:

    No.1 Sistimi e ikhethang e tsoetseng pele ea ho futhumatsa bophelo bo bolelele

    1.Sistimi ea ho futhumatsa e amohela hitara ea nickel ea Sweden ka katleho le ho boloka matla.Bolelele ba tlhōrō ea maqhubu a matla a mahlaseli a kotsi ke 4UM e nang le sefahleho se kobehileng ho ea ho lebelo le ntseng le phahama la mocheso, ho ntlafatsa ts'ebetso ea mocheso.Ale sistimi e khethehileng ea phepelo ea moea e qobelloang e etsa PCB le karolo e futhumatsang le ho felisa "moriti".w phello” ka botlalo .

    2.Ho sebelisa mokhoa o khethehileng oa tšireletso o hanyetsanang le mocheso o phahameng tsamaisong ea ho boloka mocheso le tšepe e khethehileng ka sebōping.

    3.Using imported Taiwan SanYue telele axis ea phahameng mocheso fan enjene le W bōpehileng joaloka mocheso phala, Model moralo, ha ho lerata, shockless le bonolo bakeng sa tlhokomelo.

    4.Whole oven ke porous aluminium e fetisetsa moea o chesang ho tiisa moea o chesang ka ho lekana ho PCB .lisebelisoa tsohle tse holimo tsa ontong li ka buleha ka ho feletseng e le hore ho be bonolo ho hloekisa setofo ka hare.

    No.2 Sistimi ea phetiso e boreleli le e tšepahalang

    1.Sistimi ea phetisetso e sebelisa mochini oa lebelo o feto-fetohang oa STK o tsoang kantle ho naha o tsoang Taiwan o tsamaellanang le 1:150 turbine reducer e ka sebetsang hantle, lebelo la lebelo le ka fihla ho 0-1500mm/min.

    2. Tšehetso ea sebopeho sa mabili a ikemetseng le lebanta le ts'oanelang lesela le sa hloekang ho etsa hore ho tsamaee hantle 'me lebelo le nepahetseng le fihle ho ± 20 mm / min.

    3.Lebanta le khethehileng le sa hloekang: le tšoarella ebile le sa tsitsane, ha ho bonolo ho holofala le bophelo bo bolelele.

    No.3 Sistimi e tsitsitseng le e tšepahalang ea taolo ea motlakase

    1.E amohela taolo ea thermostat e tsoang kantle ho naha e nang le taolo e makatsang le sistimi e bohlale ea ho laola PID. E ka arabela ka potlako liphetoho tsa mocheso o kantle le ho netefatsa mocheso o mongata o leka-lekaneng ke ts'ebetso e bohlale ea PID le ho futhumatsa ka mokhoa o itekanetseng.

    2. E sebelisa thermocouple e tsoang kantle ho naha ho tsoa Taiwan ka sebaka se seng le se seng sa mocheso, e ka khona ho etsa liphetoho sebakeng se seng le se seng sa mocheso, ho fetisa le ho laola ka nako, ho lefella tekanyo ea mocheso sebakeng ka seng.

    3 .Special SSR solid state relay e tsamaellanang le radiator e inehetseng e ntlafatsa katleho ea mocheso haholo le ho lelefatsa bophelo ka katleho.Ha ho tlhahiso ea puisano le ts'ebetso ea taolo e bobebe ka thermostat, e ka lekola liphetoho tsa mocheso o kantle le boleng ba calorific, ho laola sesebelisoa sa ho futhumatsa ka sekhahla se tlase, ho netefatsa ho nepahala ho phahameng hoa taolo ea mocheso le mocheso o ts'oanang kahare le bolelele, tataiso, mocheso. kabo, tsena kaofela li kopana le litekanyetso tsa IPC .

    4. Matla a mangata, futhumatsa ka potlako, ho hlokahala feela metsotso e 20 ho tloha mocheso oa kamore ho ea ho mocheso o sa khaotseng.

    5 .Ho hloleha ho hlahlojoa le alamo e khanyang ea molumo.

    6. Ho lieha ho etsa mosebetsi oa tlhahiso, ho pholile ha seaparo ka mor'a ho koala: thibela ho senyeha ha karolo.

    Tlhaloso:

    Mohlala

    TYtech 6010

    Sistimi ea ho futhumatsa Palo ea libaka tse futhumatsang UP 6/TLASANE 6
    Palo ea libaka tsa ho pholisa Holimo ho 1/BOTTOM 1
    Bolelele ba libaka tsa ho futhumatsa 2500MM
    Mokhoa oa ho futhumatsa moea o chesang
    Mokhoa oa ho Pholisa Matla a moea
         Sistimi ea Conveyor Max.Bophara ba PCB 300mm
    Bophara ba lebanta la Mesh 400mm
    Tataiso ea phetiso L→R(kapa R→L)
    Phetiso Net Height 880±20mm
    Mofuta oa phetiso Mesh le ketane
    Bophara ba seporo 0-300 limilimithara
    Lebelo la conveyor 0-1500mm/min
    Bophahamo ba karolo Ka holimo 35mm, tlase 25mm
    Auto/manual Lubrication maemo
    Mokhoa oa holimo oa hood Motlakase o ikemetseng
    Lehlakore la terene le tsitsitseng Seporo se ka pele se tsitsitse (khetho: seporo sa ka morao se tsitsitse)
    Likarolo tse phahameng Ka holimo le tlase 25mm
            Tsamaiso ea taolo Phepelo ea motlakase 5line 3phase 380V 50/60Hz
    Matla a qalang 18kw
    Tšebeliso e tloaelehileng ea matla 4-7KW
    Nako ea ho futhumala Hoo e ka bang metsotso e 20
    Temp.setting range Mocheso oa kamore - 300 ℃
    Temp.mokhoa oa ho laola PLC le PC
    Temp.ho laola ka nepo ±1℃
    Temp.ho kheloha ho PCB ±2℃
    Polokelo ea data Ts'ebetso ea data le boemo ba polokelo (80GB)
    Letlapa la nozzle Aluminium Alloy Plate
    Alamo e sa tloaelehang Mocheso o sa tloaelehang.(thempereichara e phahameng haholo/e tlase haholo.)
    Boto e ile ea liha alamo Leseli la toreng: Ho futhumala ha mosehla, botala bo botala, bo bofubelu bo sa tloaelehang
    Kakaretso Dimension(L*W*H) 3600×1100×1490mm
    Boima ba 'mele 900KG
    Mmala K'homphieutha e bohlooho

     

    Pakete le delibari:

    Nako ea ho tsamaisa: 10-20 matsatsi a ho sebetsa.

    sephutheloana

    Phano

    Mantsoe a sehlooho: Reflow ontong, smt reflow ontong, mochini o hlabollang oa solder, mochine oa tjheseletsa oa pcb, mochine oa pcb, mochini o hlabollang oa smt reflow, Setofo sa ho phalla ha LED, pcb reflow ontong, China reflow ontong,mochini oa smt.

    TYtech automation e ka fana ka lisebelisoa tse felletseng tsa smt ho kenyelletsa mochini oa solder,ho khetha le ho beha mochini,mochine oa khatiso oa solder,mochini o tsamaisang smt,AOI/SPI,lisebelisoa tsa smt peripheral,likarolo tsa smt etc,  any requirement please contact us by call, wechat, whatsapp: 008615361670575, email: frank@tytech-smt.com.

    LBH:

    Q. Tlhokahalo ea hau ea MOQ bakeng sa mochini ke efe?

    A. 1 beha tlhokahalo ea moq bakeng sa mochine.

    P. Lena ke lekhetlo la pele ke sebelisa mochini oa mofuta ona, na o bonolo ho o sebetsa?

    A: Ho na le bukana ea Senyesemane kapa video e tataisang e u bontšang mokhoa oa ho sebelisa mochine.

    P: Haeba mochine o na le bothata leha e le bofe ka mor'a hore re o fumane, re ka etsa joang?

    A: Moenjiniere oa rona o tla thusa ho e rarolla pele, 'me likarolo tsa mahala li u romella ka nako ea tiiso ea mochine.

    P: Na u fana ka tiisetso efe kapa efe bakeng sa mochine?

    A: E, tiisetso ea selemo sa 1 e tla fanoa bakeng sa mochine.

    P: Nka odara joang ho uena?

    A: U ka re fihlela ka lengolo-tsoibila, whatsapp, wechat le ho netefatsa theko ea hae ea ho qetela, mokhoa oa ho romella le nako ea ho patala, ebe re tla u romella invoice ea proforma ka lintlha tsa rona tsa banka.


  • E fetileng:
  • E 'ngoe: