Sebopeho
E amohela welding ea mofuta oa turntable station welding, e nkang sebaka se senyenyane mme e sebetsa hantle haholo.Thepa e amohela mokhoa o ikhethileng oa ho solder, 'me boleng ba welding bo phahame.Ho sebelisa liteishene tse 8 ho sebetsa ka nako e le 'ngoe, e na le ts'ebetso e phahameng le tlhahiso mme e boloka mosebetsi.Thepa e sebelisa welding ea ntlha e le 'ngoe mme e sebelisa matla a tlase haholo.E na le ts'ebetso e matla 'me e khona ho lemoha ho emisa ka letsoho le ka mokhoa o ikemetseng ka nako e le' ngoe.E ka nka tsela ea lenaneo mme e khona ho sebetsana ka katleho le lihlahisoa tse fapaneng ka nako e le 'ngoe.Ho itšetlehile ka sehlahisoa, u ka khetha ho sebelisa naetrojene kapa che, 'me u ka finyella liphello tse ntle tsa welding.Ts'ebetso e se nang kelello, e bonolo haholoanyane ho e sebelisa.The tjheseletsa consistency e ntle le kotsi boleng ea fokotseha.
Molemo:
a All ka mochini o le mong, tafoleng e ts'oanang ea XYZ e kopanyang ho feto-fetoha ha maemo le ho soasoa, ho sebetsa ka thata le ka botlalo.
b boleng bo phahameng ba soldering.
c E ka sebelisoa haufi le mohala oa tlhahiso, e bonolo bakeng sa ho etsa mohala oa tlhahiso.
d Taolo e felletseng ea PC.Likarolo tsohle li ka kenngoa ho PC 'me tsa bolokoa ho menu ea PCB, joalo ka tsela e tsamaeang, mocheso oa solder, mofuta oa flux, mofuta oa solder, mocheso oa n2 joalo-joalo, bokhoni bo botle ba ho batla le ho fumana boleng ba ho pheta-pheta.
Setšoantšo se qaqileng
Litlhaloso
Mohlala | TY-400C |
Kakaretso | |
Boemo | L1000mm * W1133mm * H1810mm |
Kakaretso ea matla | 3kw |
Tšebeliso ea matla | 1kw |
Phepelo ea motlakase | Karolo e le 'ngoe ea 220V 50HZ |
Boima bo kahare | 380KG |
Reuiqred moea mohloli | 3-5 Libara |
Phallo ea moea e hlokahalang | 8-12L/min |
Ho hlokahala khatello ea N2 | 3-4 Libara |
Phallo e hlokahalang ea N2 | > 2 cubic metres ka hora |
N2 bohloeki | 》99.998% |
Paletla | E ka sebelisoa ha ho hlokahala |
Sebaka se seholo sa solder | L320 * W400MM(E ka etsoa ka mokhoa o ikhethileng) |
Botenya ba PCB | 0.2mm-----6mm |
PCB moeli | >3 limilimithara |
Ho laola | PC ea indasteri |
Loading board | Bukana |
Boto ea ho laolla | Bukana |
Bophahamo ba ho sebetsa | 900+/-30mm |
Kopo ea ho tsamaisa thepa | Ha ho na moeli |
Conveyor tlase clearance | 30MM |
Motsamao oa motsamao | X, Y, Z |
Taolo ya motsamao | stepper |
Ho nepahala ha boemo | +/ - 0.1 limilimithara |
Chassis | Tšepe sebopeho tjheseletsa |
Tsamaiso ea phallo | |
Nozzle ea flux | Valofo ea ente |
Bokhoni ba tanka ea Flux | 1L |
Tanka ea metsi | tanka ea khatello |
Spitsa e kgolohadi | |
Nomoro ea pitsa e tloaelehileng | 1 |
Bophahamo ba pitsa ea solder | 10 ~ 15kgs / sebopi |
Boemo ba mocheso | PID |
Nako ea ho qhibiliha | 30--40 Metsotso |
Mocheso o moholo | 350 C |
Solder heater | 1.2kw |
Snozzle e tsofetseng | |
Nozzle e fifala | Libopeho tse ikhethileng |
Lisebelisoa tsa nozzle | tšepe ea motsoako |
Nozzle e nang le lisebelisoa | Tlhophiso e tloaelehileng: likotoana tse 5 / sebōpi |
Tsamaiso ea N2 | |
N2 heater | Standard |
Boemo ba mocheso oa N2 | 0 - 350 C |
Tšebeliso ea N2 | 1---2m3/hora/nozzle ea thini |