Sesebelisoa sa ho Soldering sa Wave Free TYtech T300
SELELEKELA:
1. Ho boloka matla, kopo e se nang lead, e kopana le tlhokahalo ea ts'ireletso ea tikoloho le moralo o bonolo oa basebelisi
2. Automatic power system, inverter control, automatic board in-load tšobotsi.
3. Flux sprayer sebelisa transverse Japanese spray nozzle le ho khanna ka stepper motor, spray range e khetha, PLC e laoloa, e nepahetse ebile e ka tšeptjoa.
4. Moralo oa li-drawer tsa ho hlaphoheloa ha Flux, o bonolo ho o hloekisa.
5. Conveyor hlomelloa 3 bophara fetolehang dikurufu, phetiso conveyor ke e tsitsitseng haholoanyane, ha ho PCB oela kotsing.
6. Menoana ea solder ea Titanium, e phahameng e matlafalitsoeng ka makhetlo a mabeli a v-groove e nang le thini e hanyetsanang
7. PID close loop controlled air pre-heaters preheating system, preheating system e sebelisa tse tharo tse ikemetseng tsa ho laola mocheso e le ho etsa bonnete ba ho boloka mocheso o babatsehang, ho tšoana ha mocheso, ho nepahala ha mocheso ho ± 2ºC.
8. Pre-heat passage modular design, tšireletso ea tikoloho le polokeho, e loketseng ho hloekisa.
9. Solder motor e amohela enjene e tsoang kantle ho naha e nang le taolo e ikemetseng, ts'ebetso e tsitsitseng.
8. Mokelikeli oa pitsa ea solder ke tšepe e entsoeng ka tšepe, ha e ke ke ea senyeha, pitsa ea solder e nang le baki ea oxidation, manya a tlaase a solder.
11. Sesebelisoa sa ho qala nako bakeng sa pitsa ea solder, solder e qhibilihisitsoe ka hare ho metsotso e 90.
12. Automatic finger cleaner a hlomelloa.
13. Ka ts'ebetso ea memori ea lebokose le letšo, mochine o ka boloka data ea SPC kamehla, ho ntlafatsa katleho ea mosebetsi.
14. Tlhokomelo e bohlale le tsamaiso ea alamo e netefatsa ts'ebetso e tsitsitseng le polokeho ea basebetsi.
Tlhaloso:
Tlhaloso e akaretsang | Boemo; 3600 * 1250 * 1560mm |
Boima ba 'mele: Hoo e ka bang: 1100kg | |
Matla a ho Qala: Hoo e ka bang 19KW | |
Matla a tloaelehileng a ho matha: 6-8 KW | |
Phepelo ea matla: 3ph, AC380V/220V 50HZ | |
Litsamaiso tsa taolo: PC e nang le Window 7 + PLC | |
PCB counter | |
Litsamaiso tsa conveyor | Tataiso: Ho tloha ho le letšehali ho ea ho le letona, Lokisa ka Pele(R ho ea ho L) |
Titanium Alloy V sebopeho Monoana | |
300mm PCB loading buffer monyako | |
Mokhoa oa ho laola lebelo la conveyor: Motor(Panasonic) | |
Lebelo la Conveyor: 300-2000mm | |
Conveyor angle: 4-7 ° | |
Bophahamo ba Karolo ea PCB"Holimo 120mm tlase: 15mm | |
Spay Flux Systems | Stepper motor drive reciprocating Spray |
7-UP ST-8 Nozzles | |
Matla a Flux ke 6.5/litha e le nngwe | |
Flux Auto Feeding (Khetho) | |
Khatello ea moea ea Spary: 3-5bar | |
Sebopeho sa modular bakeng sa tlhokomelo e bonolo | |
Sistimi ea ho futhumatsa | Libaka tse futhumatsang: Libaka tse ka tlase ho tse 3, |
Bolelele ba libaka tsa ho futhumatsa: 1450mm | |
Mokhoa oa ho futhumatsa: E qobella moea o chesang | |
Ho futhumatsa libaka modularization bonolo ho hlokomela | |
Pitsa ea solder | Bokhoni ba pitsa ea solder: 280KG |
Maqhubu a mabeli: Turbulence Wave le Lambda 2ndLeqhubu | |
lintho tse bonahalang:Titanium alloy (Op:Cast iron enamel) | |
Ho hloekisa mekhoa ea menoana. |
Mantsoe a sehlooho: Mochini oa solder oa maqhubu, mochini o hlabollang oa smt wave, mochini oa smt, lisebelisoa tsa smt, mochini oa solder oa smt, mochine oa tjheseletsa oa pcb, wave solder, wave soldering.
TYtech le eona e ka fana kareflow ontong, ho khetha le ho beha mochini, mochine oa khatiso oa solder, AOI/SPI, mochini o tsamaisang smt, lisebelisoa tsa smt peripheral etc, with any requirement please contact us by phone/whatsapp/wechat: 008615361670575, email: frank@tytech-smt.com.
LBH:
Q. Tlhokahalo ea hau ea MOQ bakeng sa mochini ke efe?
A. 1 beha tlhokahalo ea moq bakeng sa mochine.
P. Lena ke lekhetlo la pele ke sebelisa mochini oa mofuta ona, na o bonolo ho o sebetsa?
A: Ho na le bukana ea Senyesemane kapa video e tataisang e u bontšang mokhoa oa ho sebelisa mochine.
P: Haeba mochine o na le bothata leha e le bofe ka mor'a hore re o fumane, re ka etsa joang?
A: Moenjiniere oa rona o tla thusa ho e rarolla pele, 'me likarolo tsa mahala li u romella ka nako ea tiiso ea mochine.
P: Na u fana ka tiisetso efe kapa efe bakeng sa mochine?
A: E, tiisetso ea selemo sa 1 e tla fanoa bakeng sa mochine.
P: Nka odara joang ho uena?
A: O ka re fihlela ka lengolo-tsoibila, whatsapp, wechat le ho netefatsa theko ea hae ea ho qetela, mokhoa oa ho romella le nako ea ho patala, ebe re tla u romella invoice ea proforma le lintlha tsa rona tsa banka ho lefa.