Umboneleli weSisombululo soBuchule be-SMT

Sombulula nayiphi na imibuzo onayo malunga ne-SMT
intloko_ibhena

IiGourps ezininzi zeBalde PCB ezichaza iTY-350

Inkcazelo emfutshane:

 

Uphawu

1.Yamkela iincakuba ezininzi eziphezulu nezisezantsi kunye nokusika iPCB ngaxeshanye.

2. I-Castor yonyawo olulungiswayo kunye nekomityi yonyawo yenza kube lula ukuhambisa umatshini.Inokulungisa umatshini xa kufuneka.Ubude bekomityi yeenyawo obunokulungiswa bungaphezulu kwe-50MM.

3. Umatshini une-SMEMA port yokudibanisa nezinye izixhobo, kunye ne-network port.

4. Umatshini unokusebenza ngokuzinzileyo kunye nomthamo wokuvelisa ngaphezu kwe-1500pcs / h.

5. Isiphumo sokubeka iliso kwidatha: ixesha lokuqalisa umatshini, ukubeka iliso kumandla okuvelisa, ukufumanisa ukungaphumeleli kwezixhobo kunye nenkqubo yokulahlwa ngokuzenzekelayo, njl.

6. Umgama phakathi kweblade ephezulu kunye neblade esezantsi inokulungiswa ngokomgama we-V-cut on PCB.Ukuchaneka: 0.1MM.

7. Umgama phakathi kwamagqabi amabini ulungelelaniswa ukusuka kwi-8MM ukuya kwi-25MM.

8. Isantya sebhanti yezothutho sinokuhlengahlengiswa.


  • Uphawu:I-TYtech
  • Umzekelo:I-TYtech-350
  • ubukhulu boluhlu lwePCB :0.8MM-3.0MM
  • Iinkcukacha zeMveliso

    Iithegi zeMveliso

    Amaqela amaninzi eeBlades PCB Depaneling TY-350 Machine

    Umfanekiso we3
    Imifanekiso 3(1)
    Umfanekiso we-4
    umfanekiso we5
    umfanekiso 7
    Imifanekiso 5(1)

    Umtshini uxhotyiswe ngamaqela aphezulu kunye nangaphantsi kwe-20 yamaqela angahlula imigca ye-10 okanye ngaphezulu kwemivalo yokukhanya kwe-LED ngexesha elifanayo.zonke ii-blades zenziwe nge-SKD11 ephezulu yensimbi.

    I-PCB yokubamba kunye nenkqubo yokuhambisa iqinisekisa ukwahlula okuchanekileyo ngaphandle koguquko kunye ne-burrs.

    Umatshini wamkela isikrini sokuchukumisa kunye nenkqubo yokulawula ye-PLC enokuthi ibeke iliso kulwazi lwemveliso, kulula ukuyisebenzisa.

    I-interface yesiNgesi epheleleyo, kulula ukuyisebenzisa.

    Umfanekiso we9
    umfanekiso 6

    Iimbonakalo:

    ● Isantya sokuhambisa sinokuhlengahlengiswa.
    ● Ububanzi obubodwa be-PCB eyahluliweyo yi-8-20 mm.Ubukhulu bokusika ububanzi 300mm;● Umatshini onenkqubo yokutyisa ezenzekelayo;
    ● Umatshini uxhotyiswe ngesixhobo sokhuseleko.
    ● Izinto ezifanelekileyo zokusika ze-PCB: i-aluminiyam, i-FR4, i-glass fiber.
    ● Ixhotyiswe nge-SMEMA isinxibelelanisi, kulula ukuyidibanisa nomatshini onyukayo
    ● Umatshini wamkela isikrini sokuchukumisa kunye ne-PLC enokubeka iliso kwingcaciso yokuvelisa.
    ● I-MDS-900 ixhotyiswe ngeeseti ezininzi zeencakuba ezinokwahlula ukukhanya konkeibhodi bar ngexesha elinye.
    ● Umgama phakathi komsiki ongentla nasezantsi unokulungiswa ngokuchanekileyo, ukwahlulaubukhulu boluhlu lwePCB yi: 0.8MM-3.0MM.
    umfanekiso 2
    umfanekiso we-12
    umfanekiso we-13
    umfanekiso we-14

    TYtech-350- Iinkcukacha

    Umzekelo

    I-TYtech-350

    Ubungakanani obupheleleyo

    L2160*W 850* H1050mm

    Ubude bokungenisa

    850mm

    Ivacuum yococa

    Umatshini onesicoci sevacuum

    Ubude obuhambisa ioutlet

    850mm

    Ukwahlula iincakuba inombolo

    Amaqela angama-20 amacwecwe aphezulu nangaphantsi, iyonke: 40pcs

    Obona Bubude Bokusika:

    Unlimited

    PCB Ukutyeba

    0.6-5.0mm

    Ukwahlula inombolo yebha yePCB ngexesha elinye

    11 IMIGCA

    Ukwahlula ububanzi bePCB enye

    8-20MM

    Ubukhulu bePCB ububanzi

    240mm okanye 300 mm

    Ubude becandelo eliphezulu

    30 mm

    Izinto zeBlade

    SKD61

    Umyinge wobomi beBlade

    1,000,000 amaxesha (1.2m ubude, 3mm ubukhulu PCB)

    I-Voltage

    220V/50Hz okanye 110V

    Ubunzima bomatshini

    210kg

    Isithuba phakathi kweencakuba

    Umkhathi

    Amandla

    230V

    Ifoto 4(1)
    Imifanekiso 5(2)

    Igama lezahlulo

    Umthamo

    Iimpawu

    PLC

    1 PCS

    Mitsubishi

    iRhuluneli Motor

    1 PCS

    Zhong Da

    Iibheringi

    Abanye

    NSK

    Isikrini seTouh

    1 PCS

    Mitsubishi

     

    Ukusika Ububanzi bunwetshiwe

    umfanekiso we-15
    umfanekiso we-16

    Amaqela amaninzi eBlades Intshayelelo:

    a.Ukutshintsha okufanelekileyo kunye nohlengahlengiso kwiBlade;

    b.I-Blade Material: I-SKD11 ethathwe eJamani;

    c.Ubuncinci besithuba somgama weeblades yi-8mm;

    d.ukulungiswa kakuhle njengoko kuthanda;

    e.Ubukhulu be-blade 6mm;

    d.Ubukhulu be-Edge 0.2mm;

    Ifoto 7(1)
    umfanekiso we-11
    Iphepha 12(1)
    Iphepha 13(1)
    Imifanekiso ye-10

    Isicoci seVacuum (Isicoci sothuli):

    umfanekiso we-17
    umfanekiso we-18

    Ubumbeko olusemgangathweni:

    ◎ Amaqela amaninzi e-PCB yokwahlula iiBlades.

    ◎ Iipcs ezingama-40 zeencakuba ezifakwe kumatshini.

    ◎ Iwaranti yeenxalenye zonyaka o-1

     

    Ubumbeko obunokuzikhethela:

    ◎ Isidibanisi se-SMEMA

    ◎ Incakuba esetyhula 900*40pcs

    ◎ Ipakethi yasimahla.

     

    Iwaranti:

    Unyaka omnye wewaranti, ubomi beblade buzizigidi eziphindwe kabini, bunokumenyezelwa amaxesha ama-2 ukuya kwa-3.

     

    Amagama angundoqo: PCB umatshini wokusika,Umatshini wokusika u-V,pcb ukusika abavelisi,umatshini wokusika pcb oluzenzekelayo,mini pcb umatshini wokusika,umatshini wokusika ibhodi pcb,pcb v umatshini wokusika,smt umatshini wokusika,umatshini wesmt.

    I-TYtech inokubonelela nge-smt epheleleyo kunye nomgca wediphu kubandakanyareflow oven,umatshini soldering wave,khetha kwaye ubeke umatshini,isishicileli sokuncamathisela solder,I-AOI/SPI,sumatshini wokuphatha mt,izixhobo zeperipheral ze-smt,umatshini wokucocanjl. Nayiphi na imfuneko nceda uzive ukhululekile ukuqhagamshelana nathi.

     

    Iifoto zePakethi yoMatshini:

    Umfanekiso we27
    Umfanekiso we28
    Umfanekiso we29

  • Ngaphambili:
  • Okulandelayo: