Umboneleli weSisombululo soBuchule be-SMT

Sombulula nayiphi na imibuzo onayo malunga ne-SMT
intloko_ibhena

I-V-Sika i-PCB yeSahluli seCandelo leNkokeli yokuSika iCycular Blade Machine TYtech-3S

Inkcazelo emfutshane:

Umatshini wePCB osikwa ngesandla u-v

1. Ukulawulwa nge-microcomputer, ukuzinza okuphezulu kunye nokubeka ngokuchanekileyo.

2. Isantya esiphezulu sinokuphucula umphumo wokusika, yenza iibhodi kude ne-burr.

3. Blade ukuphakama uhlengahlengiso kancinane 0 ukuba 2mm, ukuphakama iqonga adjustable kwi-0 ukuya 50mm, ukuze ilingane pcb ukubhitya ezahlukeneyo, kwaye ukusombulula ingxaki ezahlukeneyo V-slot ubunzulu.

4. Seta ngokuzenzela indawo ukuma ngokuzenzekelayo ngokobude obuthile bePCB.


  • Uphawu:I-TYtech
  • Umzekelo:I-TYtech-3S
  • Ubungakanani:880*420*320mm(L*W*H)
  • Ubude bePCB obufanelekileyo:Akukho mda
  • Ukusika isantya:300~500mm/s.
  • Ukusika ubukhulu:0.6-5.0mm
  • Ubuncinane bomgama wecandelo ukusuka kwi-v-groove:1mm
  • I-Voltage:I-220 V / 50HZ okanye i-110V
  • Ubude becandelo eliphezulu:20 mm
  • Ubunzima bomatshini:52kg
  • Ixesha leWaranti yomatshini:1 unyaka
  • Ixesha lokukhokhela:Iintsuku ezili-15
  • Iinkcukacha zeMveliso

    Iithegi zeMveliso

    Umatshini wokucoca wePCB iTY-3S

    umfanekiso we-12

    Umzekelo: TY-3S

    Iimbonakalo

    1. Ngendlela ekhethekileyo yokusika, ibhodi yesiphaluka inqunywe ngamacangca amathandathu.Liqela eliqulunqwe phezulu kunye nelinye i-blade ephantsi, kunye neyunithi yokusika.Kukho A, B, C, amaqela amathathu.Yonke inkqubo yokusika yahlulwe yazizigaba ezithathu ukusuka kwiqela A blade elisike 40% ibhodi emva koko kwiqela B blade imela esikwe kwi groove ukusika liqela A ukugqiba enye 40% .eyokugqibela 20% isikwe liqela C blade kunye nokugqiba .ngenxa yokuba umthamo ngamnye wokusika uncinci, uxinzelelo oluveliswa ngexesha lokunqunyulwa kwenkqubela yehla ngaphezu kwe-80% xa kuthelekiswa nokunqunyulwa kwendabuko ngexesha.

    Ngaloo ndlela umphetho webhodi kunye nomphezulu wayo ugudileyo kakhulu ngaphandle kokuguquka.Okwangoku, ngumatshini kuphela onokuqinisekisa ipleyiti ye-aluminium ngaphandle kokuguqulwa emva kokusika.

     

    2. Ngenxa yokusika okuninzi, inkqubo yokusika ilula kakhulu kwaye iphucula kakhulu amandla esikhundla se-V-CUT groove.
    Nokuba nge-slot enzulu i-V-CUT groove ibhodi ayiyi tsiba ngaphandle kwencakuba, ukuphepha okubi.

     

    3. Ngenxa yokuba amandla okusika i-blade encinci.i-abd enesantya esiphezulu semathiriyeli yentsimbi engeniswe eSweden.ukuqina kwe-blade kuphuculwe kakhulu, kwaye ubomi bunokuba ngunyaka omnye okanye ngaphezulu xa usika ibhodi ye-aluminium.
     

    4. Zonke iiblades zokusika zilinganiswe nge-Excitation double-frequency laser interference measurement device.Qinisekisa ukuba imela yokugqibela ingaqhubeka ngokuchanekileyo ukusika kwiindawo zokubeka esele zisikwe yimela yangaphambili.Ijita yencam yemela ingaphantsi kwe-0.02mm.Qinisekisa umgangatho ogqibeleleyo wokusika.

    umfanekiso we-15
    umfanekiso we-16

    Iimpawu zeTYtech-3S

    Umzekelo

    I-TYtech-3S eneqonga le-2.4M

    Ubungakanani

    880*420*320mm(L*W*H)

    Ubude bePCB obufanelekileyo

    Akukho mda

    Ukusika isantya

    300~500mm/s.

    Ukusika ubukhulu

    0.6-5.0mm

    Ubuncinci bomgama wecandelo ukusuka kwi-v-groove

    1mm

    I-Voltage

    I-220 V / 50HZ okanye i-110V

    Ubude becandelo eliphezulu

    20 mm

    Ubunzima bomatshini

    52kg

    Ixesha leWaranti yomatshini

    Unyaka omnye

     

    Umzobo wofakelo lomatshini:

    微信截图_20220323140307
    umfanekiso 6
    umfanekiso 1

  • Ngaphambili:
  • Okulandelayo: