Umboneleli weSisombululo soBuchule be-SMT

Sombulula nayiphi na imibuzo onayo malunga ne-SMT
intloko_ibhena

Umatshini we-DIP weSolder Dual Wave soldering Machine For PCB TYtech-T300

Umatshini wokuSolisa we-DIP oMabini oMaza oMaza oMaza oMbini we-PCB TYtech-T300 uMfanekiso oFakelweyo
  • Umatshini we-DIP weSolder Dual Wave soldering Machine For PCB TYtech-T300
  • Umatshini we-DIP weSolder Dual Wave soldering Machine For PCB TYtech-T300

Inkcazelo emfutshane:

Inkcazo yeMveliso: Umatshini we-Solder waseTshayina we-TYtech umatshini wokuthambisa we-T300 one-1450mm ubude bokufudumeza, iindawo ezi-3 zokufudumeza,

iinkqubo zokulawula: I-PC enefestile 7 + PLC.

Ubunzima bomatshini: 1100kg,

ubukhulu: 3600 * 1250 * 1560mm.
  • Uphawu:I-TYtech
  • Umzekelo:T300

    • Iinkcukacha zeMveliso

    Iithegi zeMveliso

    Khokela isiXhobo sokuSoda saMaza sasimahla iTYtech T300

    umatshini welding wediphu
    umfanekiso we48

    INTSHAYELELO:

    1. Ukonga amandla, isicelo esingena-lead, sihlangabezane neemfuno zokhuseleko lokusingqongileyo kunye noyilo olulungele ukusetyenziswa

    2. Inkqubo yamandla ezenzekelayo, ulawulo lwe-inverter, ibhodi ezenzekelayo yomthwalo womthwalo.

    3. Isitshizi se-Flux sisebenzisa umbhobho wokutshiza waseJapan onqamlezayo kunye nokuqhuba nge-stepper motor, uluhlu lokutshiza luyakhetha, i-PLC ilawulwa, ichanekile kwaye inokuthenjwa.

    4. Uyilo lwedrowa yokubuyisela i-Flux, kulula ukuyicoca.

    5. Umthumeli exhotyiswe 3 ububanzi izikrufu adjustable, transmission conveyor uzinzile ngakumbi, akukho PCB falling umngcipheko.

    6. Iminwe ye-Titanium solder, i-v-groove eyomeleziweyo ephezulu ene-tin ukumelana

    7. I-PID close loop elawulwa yi-hot air pre-heaters, inkqubo yokufudumeza kwangaphambili isebenzisa ulawulo oluzimeleyo lobushushu obuthathu ukuze kuqinisekiswe ukugcinwa kobushushu obugqwesileyo, ukufana kobushushu, ukuchaneka kobushushu kwi-± 2ºC.

    8. Uyilo lwemodyuli yangaphambi kobushushu, ukukhuselwa kwendalo kunye nokhuseleko, olulungele ukucocwa.

    9. I-Solder motor ithatha i-motor ephezulu yokuguqula i-frequency kunye nolawulo oluzimeleyo, ukusebenza okuzinzileyo.

    8. Isixhobo se-solder pot's inpeller yintsimbi, ayikhe idle, imbiza yesolder enejacket yeoxidation, intlenga ephantsi.

    11. Uphawu lokuqalisa isibali-xesha kwimbiza yesolder, i-solder inyibilike ngaphakathi kwimizuzu engama-90.

    12. Isicoci seminwe esizenzekelayo sixhotyiswe.

    13. Ngomsebenzi wememori yebhokisi elimnyama, umatshini unokuhlala ugcina idatha ye-SPC, ukuphucula ukusebenza kakuhle.

    14. Ukubeka iliso okuhlakaniphile kunye nenkqubo ye-alamu iqinisekisa ukusebenza okuzinzileyo kunye nokhuseleko lwabaqhubi.

    Imifanekiso engama-40
    umfanekiso we51
    Umfanekiso we23
    umfanekiso we52

    Inkcazo:

         Iinkcukacha ngokubanzi Ubungakanani;3600*1250*1560mm
    Ubunzima: malunga ne-1100kg
    Amandla okuqalisa: malunga ne-19KW
    Amandla okuqhuba aqhelekileyo :6-8 KW
    Unikezelo lwamandla: 3ph, AC380V / 220V 50HZ
    Iinkqubo zolawulo:PC Nge Window 7+PLC
    Ikhawuntara yePCB
         Iinkqubo zokuhambisa Umkhomba-ndlela: Ekhohlo ukuya eKunene, Lungisa ngaphambili (R ukuya ku-L)
    I-Titanium Alloy V imilo yeFinger
    300mm PCB yokulayisha isithinteli ekungeneni
    Indlela yokulawula isantya soMhambisi: Motor(Panasonic)
    Isantya sokuhambisa: 300-2000mm
    I-angle yokuhambisa: 4-7 °
    PCB Component Height”Phezulu 120mm ezantsi:15mm
        Spay Flux Systems Stepper motor drive reciprocating Spray
    7-UP ST-8 Imilomo
    Umthamo weFlux yi-6.5/litre
    Ukutya okuzenzekelayo kweFlux (Ukhetho)
    Uxinzelelo lomoya onqabileyo: 3-5bar
    Ubume bemodyuli ukuze kube lula ukugcinwa
      Inkqubo yokufudumeza Iindawo zokufudumeza: Iindawo ezi-3 ezisezantsi,
    Ubude beendawo zokufudumeza: 1450mm
    Indlela yokufudumeza:Inyanzelisa umoya oshushu
    Imodyuli yeendawo zokufudumeza kulula ukuyigcina
      Imbiza yesolder Umthamo wembiza yesolder :280KG
    Amaza amabini: I-Turbulence Wave kunye neLambda 2ndWave
    Izinto :I-Titanium alloy (Op:Intsimbi yokuphosa i-enamel)
    Ukucoca iinkqubo zeFinger.

     

    Amagama angundoqo: Umatshini we-wave soldering, smt wave solder machine, umatshini wesmt, izixhobo ze-smt, smt umatshini wokuthengisa, pcb umatshini welding, wave solder, i-wave soldering.

    I-TYtech inokubonelelareflow oven, khetha kwaye ubeke umatshini, isishicileli sokuncamathisela solder, I-AOI/SPI, smt umatshini wokuphatha, izixhobo zeperipheral ze-smt etc, with any requirement please contact us by phone/whatsapp/wechat: 008615361670575, email: frank@tytech-smt.com.

    FAQ:

    Q.Yintoni imfuno yakho ye-MOQ kumatshini?

    A. 1 iseti imfuneko moq kumatshini.

    Q. Le yeyokuqala ndisebenzisa olu hlobo lomatshini, ngaba kulula ukusebenza?

    A: Kukho incwadi yesiNgesi okanye ividiyo yesikhokelo ekubonisa indlela yokusebenzisa umatshini.

    Umbuzo: Ukuba umatshini unayo nayiphi na ingxaki emva kokuba siwufumene, sinokwenza njani?

    A: Injineli yethu iya kunceda ukuyicombulula kuqala, kwaye iinxalenye zasimahla zithumela kuwe ngexesha lewaranti yomatshini.

    Q: Ngaba unikezela ngewaranti kumatshini?

    A: Ewe iwaranti yonyaka we-1 iya kubonelelwa kumatshini.

    Umbuzo: Ndingayifaka njani iodolo nawe?

    A: Unokusifumana nge-imeyile, i-whatsapp, i-wechat kwaye uqinisekise ixabiso lokugqibela, indlela yokuthumela kunye nexesha lokuhlawula, emva koko siya kukuthumelela i-invoyisi ye-proforma kunye neenkcukacha zethu zebhanki ukuhlawula.

  • Ngaphambili:
  • Okulandelayo:

    • IIMVELISO EZINXULUMENEYO