Isici
Isici:
1. Ifakwe isifutho esijwayelekile, i-preheating kanye ne-welding units, yonke inqubo yokushisela ingaqedwa endaweni encane yomshini.
2. Imishini yamukela inqubo ekhethiwe ye-wave soldering, futhi izinga lokushisela liphezulu.
3. Izinyathelo ezincane, zonga indawo yokufaka.
4. Ukusebenzisa inguqulo yakamuva yesofthiwe yokusebenza, isikhombimsebenzisi somshini womuntu sinobungane futhi ukusebenza kulula futhi kulula ukukuqonda.
5. Ukuqapha kwesikhathi sangempela senqubo yokushisela nokuqoshwa kwenqubo.
6. Ukusebenza okungenangqondo, okulula ukukusebenzisa.Ukuvumelana kokushisela kuhle futhi ingozi yekhwalithi iyancipha.
7. Yamukela isithando somlilo se-electromagnetic pump tin esijwayelekile, esingenazo izingxenye zokugqoka futhi kulula ukusinakekela.
Okuhle:
a Konke emshinini owodwa, kuthebula elinyakazayo le-XYZ lihlanganisa ukuguquguquka okukhethiwe kanye nokunamathisela, okuhlangene nokusebenza okugcwele.
b PCB board movement, fluxer nozzle and solder pot fixed.
c Ikhwalithi ephezulu yokunamathisela.
d Ingasetshenziswa eceleni komugqa wokukhiqiza, oguquguqukayo ekwakheni umugqa wokukhiqiza.
e Ukulawula okugcwele kwe-PC.Wonke amapharamitha angasethwa ku-PC futhi alondolozwe kumenyu ye-PCB, njengendlela ehambayo, izinga lokushisa le-solder, uhlobo lwe-flux, uhlobo lwe-solder, izinga lokushisa le-n2 njll, ikhono elingcono kakhulu lokulandelela kanye nekhwalithi yokuphinda uthole ikhwalithi yokuphinda.
Imininingwane yesithombe
Imininingwane
Imodeli | I-TYO-300 |
Okujwayelekile | |
Ubukhulu | L1220mm * W1000mm * H1650mm (akubandakanyi isisekelo) |
Amandla ajwayelekile | 5 kw |
Amandla okusebenzisa | 1--3kw |
Ukunikezwa kwamandla kagesi | isigaba esisodwa 220V 50HZ |
Isisindo sengqikithi | 380KG |
Umthombo womoya ophindwe kabusha | 3-5 Amabha |
Ukugeleza komoya okudingekayo | 8-12L/min |
Ingcindezi ye-N2 edingekayo | 3-4 Amabha |
Ukugeleza kwe-N2 okudingekayo | > 2 cubic metres/ihora |
Kudingeka ubumsulwa be-N2 | 》99.998% |
Ukukhathala okudingekayo | 500--800CMB/H |
Cinethiwekhi noma i-PCB | |
Inkampani yenethiwekhi | ingasetshenziswa njengoba kudingeka |
Indawo ye-solder enkulu | L400 * W300MM(usayizi kungenziwa egcizelele) |
Ubukhulu be-PCB | 0.2mm-----6mm |
PCB enqenqemeni | > 3mm |
Colawulayo & conveyor | |
Ukulawula | I-PC yezimboni |
Ilayisha ibhodi | Imanuwali |
Ibhodi yokulayisha | Imanuwali |
Ubude bokusebenza | 900+/-30mm |
Imvume yokudlulisa | 100MM |
Ukucaciswa kwe-Conveyor phansi | 30MM |
Ithebula elinyakazayo | |
I-eksisi yokunyakaza | X, Y, Z |
Ukulawula ukunyakaza | Ukulawulwa kwe-Servo |
Ukunemba kwesikhundla | + / - 0.1 mm |
I-Chassis | Ukushisela isakhiwo sensimbi |
Ukuphathwa kwe-Flux | |
I-flux nozzle | i-jet valve |
Umthamo wethangi le-Flux | 1L |
I-Flux tank | ibhokisi le-flux |
Shisisa ngaphambili | |
Indlela yokushisa | Ukushisa kwe-infrared okuphansi |
Amandla heater | 3kw |
Izinga lokushisa | 25--240c degree |
Sibhodwe elidala | |
Inombolo yebhodwe elijwayelekile | 1 |
Umthamo webhodwe le-solder | 15 kgs / esithandweni |
Ibanga lokushisa le-solder | I-PID |
Isikhathi sokuncibilika | 30--40 Amaminithi |
Izinga lokushisa eliphezulu le-solder | 350 C |
I-heater kagesi | 1.2kw |
Sumbhobho omdala | |
Umbhobho ufiphele | umumo wangokwezifiso |
Izinto zeNozzle | insimbi ye-alloy |
I-nozzle ejwayelekile | Ukucushwa okujwayelekile: izingcezu ezi-5 / isithando somlilo (ububanzi bangaphakathi 4mm x 3pcs, 5mm, 6mm) |
Ukuphathwa kwe-N2 | |
I-heater engu-N2 | ejwayelekile |
Ibanga lokushisa elingu-N2 | 0 - 350 C |
Ukusetshenziswa kwe-N2 | 1---2m3/h/nozzle |