Umshini Wokubuyisela I-Dross Solder TY-10S

Izici:
1.Isebenzisa ukuxuba okukhethekile nomklamo wokuhlukanisa, amanyela afakwa ngokuzenzekelayo engxenyeni engaphakathi yengxenye yokuxuba.
2.Ukuhlukaniswa okuzenzakalelayo kwethini nomlotha kathini, kumshini wokuqoqa ithini nomlotha.
3.Ithayela elihlanzekile elihlukanisiwe eliwuketshezi eligcinwa ngokuzenzakalelayo ekhabetheni likathayela, lapho lifinyelela kuvolumu ethile, isistimu ye-alamu iyavuleka, opharetha udinga kuphela ukukhipha ithini eliwuketshezi ethreyini yokubumba.
I-4.Lo mshini awukho isidingo sokuhlanza ikhabethe lokuhlunga izinga lokushisa eliphezulu ukuze ugweme noma yikuphi ukulimala komuntu.
5.Ukuzinza kwezinga eliphezulu lokuhlukanisa, uhlobo lwempushana lokuhlukaniswa komlotha ngemva kokuhlukana aluboni noma iyiphi i-solder ngokubuka.
6.Suit okonga amandla, ukuphepha kanye ne-Econ-friendly imfuneko.
7.Amandla: 100KG-120KG/8H
I-8.I-mesh yokuvimbela ukushisa ilawula izinga lokushisa ngaphandle komshini ngaphakathi kuka-45 ℃, okuwukugwema u-opharetha ukuthi alimale.

Umzimba:
I-All-stainless steel tank, lula okuhlanzekile.
1.Amandla:220V;
2.Totol ukusetshenziswa kwamandla:4.3KW;
3.Amandla okugijima ajwayelekile:≤1.2KW;
Isisindo se-4.Net:约110KG;
5.Ubukhulu:660mm(L)X480mm(W)X1000mm(H)

Ingxenye ye-Electronic:
1.Ukulawula iphaneli yekhibhodi
Imitha yezinga lokushisa engu-2.OmRON ibonisa ngokuqondile ukulungiswa kwezinga lokushisa ngezinga lokushisa elinembile.
3.Isebenzisa i-PID+SSR ukulawula izinga lokushisa
4.Isebenzisa idivayisi yokuvikela i-creepage.

Isistimu yokuhlanganisa nokwehlukanisa:
1.Isango lokudla: ≤10KG imfucumfucu
2.316L stainess steel oven ingathwala izinga lokushisa eliphezulu nokugqwala.Ubukhulu.70kg "ithini eliphansi" eligcinwe kuhhavini elingenalutho, lidinga imizuzu engama-60 ukuze lincibilike lapho kusetshenziswa umshini.
3.Isebenzisa i-heater yomumo othi “U” embozwe ipuleti lokushisisa lensimbi, okugwema ukonakala.
I-4.I-Patent yokuxuba kanye nohlelo lokuhlukanisa.
5.Ukuhlukaniswa Isivinini: 15KG / 60mins
I-6.I-Mixing Motor: I-90W 220V I-Taiwan yenza injini
7.Ibha ye-Tin/umlotha: Ithini elihlanzekile elihlukanisiwe lingena ekhabetheni, lapho lifika kuvolumu ethile, isistimu ye-alamu iyavula ukuze yazise ukuphuma.Ifakwe ithreyi yokubumba yamasethi angu-1.Umlotha ungena ebhokisini lokuqoqa, elifakwe amabhokisi ama-2.

Uhlelo Lokuhlunga:
Isango elikhipha amandla langaphandle: 4″.
Ukugeleza kokusebenza:

1.Ukuxuba injini
2.Isitsha se-tin strorage
3.Ukuxuba isigxobo
4.Imigqomo yomlotha
5.Ukungena kweDross
6.Ukuphuma kwethini
7.Moldin
8.Inqola